Renesas ISL3170EIUZ
RS-422/RS-485 Interface IC ISL3170E IEC-6100 10 3V RS-485 115KBPS
Brands: Renesas Technology Corp
Mfr.Part #: ISL3170EIUZ
Datasheet: ISL3170EIUZ Datasheet (PDF)
Package/Case: MSOP-10
RoHS Status:
Stock Condition: 2062 pcs, New Original
Product Type: Interface ICs
0
1
*All prices are in USD
Qty | Unit Price | Ext Price |
---|---|---|
1 | $2.631 | $2.631 |
200 | $1.051 | $210.200 |
500 | $1.015 | $507.500 |
980 | $0.998 | $978.040 |
In Stock:2062 PCS
*Products eligible for online ordering ship within 1-2 business days,please contact us for exact shipping times.
ISL3170EIUZ General Description
The Renesas ISL317xE are ±15kV IEC61000 ESD protected, 3. 3V powered single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. These devices have very low bus currents (+125µA/-100µA), so they present a true “1/8 unit load” to the RS-485 bus. This allows up to 256 transceivers on the network without violating the RS-485 specification's 32 unit load maximum, and without using repeaters. For example, in a remote utility meter reading system, individual meter readings are routed to a concentrator using an RS-485 network, so the high allowed node count minimizes the number of repeaters required. Receiver (Rx) inputs feature a “Full Fail-Safe” design, which ensures a logic high Rx output if Rx inputs are floating, shorted, or terminated but undriven. Hot Plug circuitry ensures that the Tx and Rx outputs remain in a high impedance state while the power supply stabilizes. The ISL3170E through ISL3175E utilize slew rate limited drivers which reduce EMI, and minimize reflections from improperly terminated transmission lines, or unterminated stubs in multidrop and multipoint applications. Slew rate limited versions also include receiver input filtering to enhance noise immunity in the presence of slow input signals. The ISL3170E, ISL3171E, ISL3173E, ISL3174E, ISL3176E, and ISL3177E are configured for full duplex (separate Rx input and Tx output pins) applications. The half duplex versions multiplex the Rx inputs and Tx outputs to allow transceivers with output disable functions in 8 Ld packages.
Features
- IEC61000 ESD protection on RS-485 I/O pins ±15kV
- Class 3 ESD level on all other pins >7kV HBM
- Full fail-safe (open, short, terminated/floating) receivers
- Hot plug - Tx and Rx outputs remain three-state during power-up (only versions with output enable pins)
- True 1/8 unit load allows up to 256 devices on the bus
- Single 3.3V supply
- High data rates up to 20Mbps
- Low quiescent supply current 800µA (Max)
- Ultra low shutdown supply current 10nA
- -7V to +12V common-mode input/output voltage range
- Half and full duplex pinouts
- Three state Rx and Tx outputs available
- Current limiting and thermal shutdown for driver overload protection
- Tiny MSOP packages consume 50% less board space
- Pb-free (RoHS compliant)
Application
- Industrial automation and control systems
- Building automation systems
- Motor control systems
- Energy management systems
- Instrumentation and measurement systems
- Security and surveillance systems
Specifications
Parameter | Value | Parameter | Value |
---|---|---|---|
Pin Count | 10 | Package Category | Small Outline Packages |
Released Date | Dec 5, 2020 |
Shipping
Shipping Type | Ship Fee | Lead Time | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 days | |
Fedex | $20.00-$40.00 (0.50 KG) | 2-5 days | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 days | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 days | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 days | |
REGISTERED AIR MAIL | $20.00-$40.00 (0.50 KG) | 2-5 days |
Processing Time:Shipping fee depend on different zone and country.
Payment
Terms of payment | Hand Fee | |
---|---|---|
Wire Transfer | charge US$30.00 banking fee. | |
Paypal | charge 4.0% service fee. | |
Credit Card | charge 3.5% service fee. | |
Western Union | charge US.00 banking fee. | |
Money Gram | charge US$0.00 banking fee. |
Guarantees
1.The electronic components you purchase include 365 Days Warranty, We guarantee product quality.
2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.
Packing
-
Step1 :Product
-
Step2 :Vacuum packaging
-
Step3 :Anti-static bag
-
Step4 :Individual packaging
-
Step5 :Packaging boxes
-
Step6 :bar-code shipping tag
All the products will packing in anti-staticbag. Ship with ESD antistatic protection.
Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.
We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.
After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.
Equivalent Parts
For the ISL3170EIUZ component, you may consider these replacement and alternative parts:
Part Number
Brands
Package
Description
Part Number : SN65HVD485E
Brands :
Package :
Description :
Part Number : LTC1480
Brands :
Package :
Description :
Part Number : ST1480
Brands :
Package :
Description :
Part Number : DS485
Brands :
Package :
Description :
Part points
-
The ISL3170EIUZ chip is a high-speed RS-485/RS-422 transceiver that enables robust communication over long distances. It features a ±15kV IEC61000 ESD protection, providing reliability in harsh environments. The device operates over a wide voltage range and supports data rates up to 250Mbps. With its built-in fail-safe and hot plug features, the ISL3170EIUZ chip is suitable for industrial automation, instrumentation, and control systems.
-
Equivalent
Some equivalent products to the ISL3170EIUZ chip are the MAX3170EAIUZ, LTC2865IUD-1#PBF, and ADM3491ARZ chips. -
Features
The ISL3170EIUZ is a high-speed, differential line transceiver. It features a programmable slew rate for improved signal integrity and reduced EMI, supports data rates up to 40Mbps, and operates with a power supply range of 3V to 5.5V. The device offers low-power consumption in standby mode and is suitable for industrial applications. -
Pinout
The ISL3170EIUZ is a 3.3V, ±15kV ESD protected, low power, differential transceiver with a pin count of 8. It is commonly used in RS-485 and RS-422 communication systems. It provides the ability to send and receive data over long distances and is suitable for industrial automation, building automation, and telecommunications applications. -
Manufacturer
The ISL3170EIUZ is manufactured by Renesas Electronics Corporation. Renesas is a Japanese semiconductor company that specializes in manufacturing and selling integrated circuits and microcontrollers for various industries, including automotive, home appliances, industrial, and more. -
Application Field
The ISL3170EIUZ is a high-speed, differential transceiver commonly used in industrial automation, general-purpose serial data communication, and remote sensing applications. It is ideal for harsh environments and supports data rates up to 40 Mbps. -
Package
The ISL3170EIUZ chip has a package type of LFCSP (Lead-Free Chip Scale Package), a form of LFCSP-16, and a size of 3mm x 3mm.
Datasheet PDF
Key points
-
The ISL3170EIUZ chip is a high-speed RS-485/RS-422 transceiver that enables robust communication over long distances. It features a ±15kV IEC61000 ESD protection, providing reliability in harsh environments. The device operates over a wide voltage range and supports data rates up to 250Mbps. With its built-in fail-safe and hot plug features, the ISL3170EIUZ chip is suitable for industrial automation, instrumentation, and control systems.
-
Equivalent
Some equivalent products to the ISL3170EIUZ chip are the MAX3170EAIUZ, LTC2865IUD-1#PBF, and ADM3491ARZ chips. -
Features
The ISL3170EIUZ is a high-speed, differential line transceiver. It features a programmable slew rate for improved signal integrity and reduced EMI, supports data rates up to 40Mbps, and operates with a power supply range of 3V to 5.5V. The device offers low-power consumption in standby mode and is suitable for industrial applications. -
Pinout
The ISL3170EIUZ is a 3.3V, ±15kV ESD protected, low power, differential transceiver with a pin count of 8. It is commonly used in RS-485 and RS-422 communication systems. It provides the ability to send and receive data over long distances and is suitable for industrial automation, building automation, and telecommunications applications. -
Manufacturer
The ISL3170EIUZ is manufactured by Renesas Electronics Corporation. Renesas is a Japanese semiconductor company that specializes in manufacturing and selling integrated circuits and microcontrollers for various industries, including automotive, home appliances, industrial, and more. -
Application Field
The ISL3170EIUZ is a high-speed, differential transceiver commonly used in industrial automation, general-purpose serial data communication, and remote sensing applications. It is ideal for harsh environments and supports data rates up to 40 Mbps. -
Package
The ISL3170EIUZ chip has a package type of LFCSP (Lead-Free Chip Scale Package), a form of LFCSP-16, and a size of 3mm x 3mm.
We provide high quality products, thoughtful service and after sale guarantee
-
We have rich products, can meet your various needs.
-
Minimum order quantity starts from 1pcs.
-
Lowest international shipping fee starts from $0.00
-
365 days quality guarantee for all products
Ovaga's extensive inventory of professional electronic components makes it easy to find what we need for our projects.