This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

NXP SC18IS600IPW

SPI to IC-bus interface

Ovaga Certification

Brands: NXP Semiconductor

Mfr.Part #: SC18IS600IPW

Datasheet: SC18IS600IPW Datasheet (PDF)

Package/Case: TSSOP-16

Product Type: Interface ICs

RoHS Status:

Stock Condition: 3415 pcs, New Original

Add To Bom

Quick Quote

Please submit RFQ for SC18IS600IPW or email to us: Email: [email protected], we will contact you within 12 hours.

SC18IS600IPW General Description

SC18IS600IPW is an I2C-bus to SPI Bridge IC, which is used to interface SPI devices with I2C-bus. It is a small, low power, and cost-effective solution that enables a system to communicate with up to 8 SPI devices using only two wires, SDA (serial data) and SCL (serial clock) of the I2C-bus.

sc18is600ipw

Features

  • Up to 8 SPI devices can be connected
  • Supports SPI clock frequencies up to 15 MHz
  • 3.3 V or 5 V supply voltage
  • Low standby current consumption (less than 1 uA)
  • Automatic detection of SPI modes (0,0 and 1,1)
  • 16 bytes of transmit and receive buffer
  • Interrupt output to signal end of transmission or reception

Application

  • Industrial automation
  • Consumer electronics
  • Medical equipment
  • Automotive electronics
  • Networking equipment
  • Embedded systems

Specifications

Parameter Value Parameter Value
Source Content uid SC18IS600IPW Pbfree Code Yes
Rohs Code Yes Part Life Cycle Code Obsolete
Ihs Manufacturer NXP SEMICONDUCTORS Part Package Code TSSOP
Package Description TSSOP, TSSOP16,.25 Pin Count 16
Reach Compliance Code unknown HTS Code 8542.31.00.01
Address Bus Width Clock Frequency-Max 18 MHz
External Data Bus Width JESD-30 Code R-PDSO-G16
JESD-609 Code e4 Length 5 mm
Moisture Sensitivity Level 1 Number of Terminals 16
Operating Temperature-Max 85 °C Operating Temperature-Min -40 °C
Package Body Material PLASTIC/EPOXY Package Code TSSOP
Package Equivalence Code TSSOP16,.25 Package Shape RECTANGULAR
Package Style SMALL OUTLINE, THIN PROFILE, SHRINK PITCH Peak Reflow Temperature (Cel) 260
Qualification Status Not Qualified Seated Height-Max 1.1 mm
Supply Current-Max 16 mA Supply Voltage-Max 3.6 V
Supply Voltage-Min 2.4 V Surface Mount YES
Technology CMOS Temperature Grade INDUSTRIAL
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au) Terminal Form GULL WING
Terminal Pitch 0.65 mm Terminal Position DUAL
Time@Peak Reflow Temperature-Max (s) 30 Width 4.4 mm
uPs/uCs/Peripheral ICs Type BUS CONTROLLER, I2C

Shipping

Shipping Type Ship Fee Lead Time
DHL DHL $20.00-$40.00 (0.50 KG) 2-5 days
Fedex Fedex $20.00-$40.00 (0.50 KG) 2-5 days
UPS UPS $20.00-$40.00 (0.50 KG) 2-5 days
TNT TNT $20.00-$40.00 (0.50 KG) 2-5 days
EMS EMS $20.00-$40.00 (0.50 KG) 2-5 days
REGISTERED AIR MAIL REGISTERED AIR MAIL $20.00-$40.00 (0.50 KG) 2-5 days

Processing Time:Shipping fee depend on different zone and country.

Payment

Terms of payment Hand Fee
Wire Transfer Wire Transfer charge US$30.00 banking fee.
Paypal Paypal charge 4.0% service fee.
Credit Card Credit Card charge 3.5% service fee.
Western Union Western Union charge US$0.00 banking fee.
Money Gram Money Gram charge US$0.00 banking fee.

Guarantees

1.The electronic components you purchase include 365 Days Warranty, We guarantee product quality.

2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.

Packing

  • Product

    Step1 :Product

  • Vacuum packaging

    Step2 :Vacuum packaging

  • Anti-static bag

    Step3 :Anti-static bag

  • Individual packaging

    Step4 :Individual packaging

  • Packaging boxes

    Step5 :Packaging boxes

  • bar-code shipping tag

    Step6 :bar-code shipping tag

All the products will packing in anti-staticbag. Ship with ESD antistatic protection.

Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.

We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.

After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.

  • ESD
  • ESD

Equivalent Parts

For the SC18IS600IPW component, you may consider these replacement and alternative parts:

Part Number

Brands

Package

Description

Part Number:  MCP2210-I/SO

Brands:  

Package:  SOP-20

Description:   IC CONVERTER USB-SPI 20-SOIC

Part Number:  MCP2210T-I/SO

Brands:  

Package:  SOIC-20

Description:   USB Interface IC USB to SPI Protocol Converter

Part Number:  MCP2210T-I/ST

Brands:  

Package:  

Description:  

Part Number:  MCP2210T-I/ML

Brands:  

Package:  

Description:  

Part Number:  MCP2210-I/ST

Brands:  

Package:  

Description:  

Part Number:  MCP2210-I/ML

Brands:  

Package:  

Description:  

Part Number:  MCP2210T-I/P

Brands:  

Package:  

Description:  

Part Number:  MCP2210-I/P

Brands:  

Package:  

Description:  

Datasheet PDF

Preliminary Specification SC18IS600IPW PDF Download

Key points

  • The SC18IS600IPW chip is a bridge device that allows easy communication between a microcontroller and multiple peripherals using the I2C interface. It supports the I2C-bus protocol and can be used to connect various peripherals such as sensors, displays, and other devices. The chip provides reliable and efficient communication, reducing the complexity of interfacing multiple peripherals with a microcontroller.
  • Equivalent

    Some equivalent products of the SC18IS600IPW chip include the SPI/I2C-bus interface, such as the SC18IS602BIPW and SC18IS603BIPW. These chips provide the same functionality as the SC18IS600IPW.
  • Features

    The SC18IS600IPW is an I2C-bus to SPI bridge interface that converts a serial I2C-bus to a serial SPI interface. It operates as an interface to connect an I2C-bus to any SPI slave device. The device is designed to be used as an interface between a standard I2C-bus of a microcontroller and an SPI bus.
  • Pinout

    The SC18IS600IPW is a bridge IC that converts I2C/SPI to serial protocol. It has a 28-pin count and functions as an interface between microcontrollers and peripheral devices, enabling communication between them using I2C or SPI protocols.
  • Manufacturer

    NXP Semiconductors is the manufacturer of the SC18IS600IPW. It is a multinational electronics company that specializes in the production of semiconductor chips and other electronic components.
  • Application Field

    The SC18IS600IPW is commonly used in applications involving serial communication, such as interfacing microcontrollers with peripheral devices. It is often utilized in industrial automation, home automation, embedded systems, and Internet of Things (IoT) applications.
  • Package

    The SC18IS600IPW chip is available in a TSSOP package type. It has a total of 24 pins and measures 6.4mm x 5.0mm x 1.2mm in size.

We provide high quality products, thoughtful service and after sale guarantee

  • products

    We have rich products, can meet your various needs.

  • quantity

    Minimum order quantity starts from 1pcs.

  • shipping

    Lowest international shipping fee starts from $0.00

  • guarantee

    365 days quality guarantee for all products

Ratings and Reviews

Ratings
Please rate the product !
Please enter a comment

Please submit comments after logging into your account.

Submit