Images are for reference only See Product Specifications
ON MC100EP809MNG
Clock Fanout Buffer (Distribution), Multiplexer IC 1:9 750 MHz 32-VFQFN Exposed Pad
Brands: ON Semiconductor, LLC
Mfr.Part #: MC100EP809MNG
Datasheet: MC100EP809MNG Datasheet (PDF)
Package/Case: QFN-32
Product Type: Clock & Timer ICs
MC100EP809MNG General Description
The MC100EP809 is a low skew 2:1:9 differential bus clock driver, designed with clock distribution in mind, accepting two clock sources into an input multiplexer. The part is designed for use in low voltage applications which require a large number of outputs to drive precisely aligned low skew signals to their destination. The two clock inputs are one differential HSTL and one differential LVPECL. Both input pairs can accept LVDS levels. They are selected by the CLK_SEL pin which is LVTTL. To avoid generation of a runt clock pulse when the device is enabled/disabled, the Output Enable (OE), which is LVTTL, is synchronous so that the outputs will only be enabled/disabled when they are already in LOW state.
The MC100EP809 guarantees low output-to-output skew. The optimal design, layout, and processing minimize skew within a device and from lot to lot. The MC100EP809 output structure uses open emitter architecture and will be terminated with 50 to ground instead of a standard HSTL configuration. To ensure that tight skew specification is realized, both sides of the differential output need to be terminated identically into 50 even if only one output is being used. If an output pair is unused, both outputs may be left open (unterminated) without affecting skew.
Designers can take advantage of the EP809's performance to distribute low skew clocks across the backplane of the board. HSTL clock inputs may be driven single-end by biasing the non-driven pin in an input pair.
Features
- 100 ps Typical Device-to-Device Skew
- 15 ps Typical Within Device Skew
- HSTL Compatible Outputs Drive 50Ω to Ground with no Offset Voltage
- Maximum Frequency > 750 MHz
- 850 ps Typical Propagation Delay
- Fully Compatible with Micrel SY89809L
- PECL and HSTL Mode Operating Range: VCCI = 3 V to 3.6 V with GND = 0 V, VCCO = 1.6 V to 2.0 V
- Open Input Default State
- Pb-Free Packages are Available
Application
- Clock distribution
Specifications
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Status | Active | CAD Models | |
| Compliance | PbAHP | Package Type | QFN-32 |
| Case Outline | 488AM | MSL Type | 1 |
| MSL Temp (°C) | 260 | Container Type | TUBE |
| Container Qty. | 74 | ON Target | Y |
| Type | Buffer | Channels | 1 |
| Input / Output Ratio | 2:1:9 | Input Level | LVDS |
| Output Level | HSTL | VCC Typ (V) | 3.3 |
| tJitterRMS Typ (ps) | 1.4 | tskew(o-o) Max (ps) | 50 |
| tpd Typ (ns) | 0.85 | tR & tF Max (ps) | 600 |
| fmaxClock Typ (MHz) | 750 | fmaxData Typ (Mbps) | - |
| Pricing ($/Unit) | Price N/A | feature-maximum-operating-supply-voltage-v | 3.6 |
| feature-minimum-operating-supply-voltage-v | 3 | feature-packaging | Tube |
| feature-rad-hard | feature-pin-count | 32 | |
| feature-supplier-package | QFN EP | feature-standard-package-name1 | QFN |
| feature-cecc-qualified | No | feature-esd-protection | Yes |
| feature-military | No | feature-aec-qualified | No |
| feature-aec-qualified-number | feature-auto-motive | No | |
| feature-p-pap | No | feature-eccn-code | EAR99 |
| feature-svhc | No |
Shipping
| Shipping Type | Ship Fee | Lead Time | |
|---|---|---|---|
 |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 days |
 |
Fedex | $20.00-$40.00 (0.50 KG) | 2-5 days |
 |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 days |
 |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 days |
 |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 days |
 |
REGISTERED AIR MAIL | $20.00-$40.00 (0.50 KG) | 2-5 days |
Processing Time：Shipping fee depend on different zone and country.
Payment
| Terms of payment | Hand Fee | |
|---|---|---|
 |
Wire Transfer | charge US$30.00 banking fee. |
 |
Paypal | charge 4.0% service fee. |
 |
Credit Card | charge 3.5% service fee. |
 |
Western Union | charge US.00 banking fee. |
 |
Money Gram | charge US$0.00 banking fee. |
Guarantees
1.The electronic components you purchase include 365 Days Warranty, We guarantee product quality.
2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.
Packing
-
Step1 :Product
-
Step2 :Vacuum packaging
-
Step3 :Anti-static bag
-
Step4 :Individual packaging
-
Step5 :Packaging boxes
-
Step6 :bar-code shipping tag
All the products will packing in anti-staticbag. Ship with ESD antistatic protection.
Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.
We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.
After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.
Part points
-
The MC100EP809MNG is a high-speed, low skew, dual 1:4 differential fanout buffer chip. It operates on a supply voltage of -3.0V to -5.5V and provides differential LVPECL outputs. It ensures minimal input-output propagation delay difference, making it ideal for applications requiring precision and synchronicity in clock distribution systems.
-
Equivalent
Some possible equivalent products of the MC100EP809MNG chip are the ON Semiconductor MC100EP809, Texas Instruments SN65LVDS104, and the NXP 74ALVC164245. These chips are all high-speed logic level translators with similar functionality. -
Features
The MC100EP809MNG is a high-speed, low-skew 1:9 differential ECL fanout buffer. It operates with a power supply range of -3.0 to -5.5V and has a maximum operating frequency of 2.5Gbps. It offers low output skew and low jitter, making it suitable for high-performance communications and networking applications. -
Pinout
The MC100EP809MNG is a 20-pin package differential PECL/LVPECL to single-ended PECL/LVPECL translator. It is compatible with any differential or single-ended out logic standards. The pin count is 20, and the main function is to translate differential signals to single-ended signals. -
Manufacturer
The manufacturer of the MC100EP809MNG is ON Semiconductor. It is an American multinational company that specializes in manufacturing power management and semiconductor devices. -
Application Field
The MC100EP809MNG is a high-speed 4:1 multiplexer designed for use in telecommunications, data communications, and networking applications. Its small size, low power consumption, and high-speed operation make it suitable for a wide range of applications where fast and efficient data switching is required. -
Package
The MC100EP809MNG chip is available in a 32-LQFP (Low Profile Quad Flat Package) package type. Its form factor is quad flat, with pins on all four sides. The size of the package is approximately 7mm x 7mm.
Datasheet PDF
We provide high quality products, thoughtful service and after sale guarantee
-
We have rich products, can meet your various needs.
-
Minimum order quantity starts from 1pcs.
-
Lowest international shipping fee starts from $0.00
-
365 days quality guarantee for all products
The website could use some improvements, but I received the components I needed.