TI TLC59116FIRHBR
LED Lighting Drivers 16B Fast-Mode Plus I2C-Bus LED Drvr
Brands: TI
Mfr.Part #: TLC59116FIRHBR
Datasheet: TLC59116FIRHBR Datasheet (PDF)
Package/Case: QFN32
Product Type: LED Lighting Drivers
RoHS Status:
Stock Condition: 4031 pcs, New Original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
Add To BomTLC59116FIRHBR General Description
The TLC59116F is an I2C-bus controlled 16-channel LED driver optimized for red/green/blue/amber (RGBA) color mixing applications. Each LED output has its own 8-bit resolution (256 steps) fixed frequency individual PWM controller that operates at 97 kHz with a duty cycle that is adjustable from 0% to 99.6% to allow the LED to be set to a specific brightness value. An additional 8-bit resolution (256 steps) group PWM controller has both a fixed frequency of 190 Hz and an adjustable frequency between 24 Hz to once every 10.73 seconds with a duty cycle that is adjustable from 0% to 99.6% that is used to either dim or blink all LEDs with the same value.
Features
- 16 LED Drivers (Each Output Programmable at
OFF, ON, LED Brightness, and Group
Dimming/Blinking Mixed With Individual LED
Brightness) - 16 Open-Drain Output Channels
- 256-Step (8-Bit) Linear Programmable Brightness
Per LED Output Varying From Fully OFF (Default)
to Maximum Brightness Using a 97-kHz PWM Signal - 256-Step Group Brightness Control Allows
General Dimming (Using a 190-Hz PWM Signal
From Fully OFF to Maximum Brightness (Default) - 256-Step Group Blinking With Frequency
Programmable From 24 Hz to 10.73 s and Duty
Cycle from 0% to 99.6% - Four Hardware Address Pins Allow 14
TLC59116F Devices to be Connected to the
Same I2C Bus - Four Software-Programmable I2C Bus Addresses
(One LED Group Call Address and Three LED
Sub-Call Addresses) Allow Groups of Devices to
be AddressedSimultaneously in Any Combination
(For example, One Register Used for ‘All Call’ So
All the TLC59116Fs on the I2C Bus Can be
Addressed at the Same Time and the Second
Register Used for Three Different Addresses So
That 1/3 of all Devices on the Bus Can Be
Addressed at the Same Time in a Group).
Software Enable and Disable for I2C Bus Address. - Software Reset Feature (SWRST Call) Allows the
Device to be Reset Through the I2C Bus - Up to 14 Possible Hardware Adjustable Individual
I2C Bus Addresses Per Device so That Each
Device Can be Programmed - Output State Change Programmable on the
Acknowledge or the STOP Command to Update
Outputs Byte-by-Byte or All at the Same Time
(Default to Change on STOP. - 120-mA Maximum Output Current
- 17-V Maximum Output Voltage
- 25-MHz Internal Oscillator Requires No External Components
- 1-MHz Fast-Mode Plus (FM+) Compatible I2C Bus
Interface With 30 mA High Drive Capability on
SDA Output for Driving High Capacity Buses - Internal Power-On Reset
- Noise Filter on SCL/SDA Inputs
- No Glitch on Power Up
- Active-Low Reset
- Supports Hot Insertion
- Low Standby Current
- 3.3-V or 5-V Supply Voltage
- 5.5-V Tolerant Inputs
- 28-Pin TSSOP (PW)
- –40°C to 85°C Operation
- APPLICATIONS
- Gaming
- Small Signage
- Industrial Equipment
All other trademarks are the property of their respective owners
Specifications
Parameter | Value | Parameter | Value |
---|---|---|---|
Number of channels | 16 | LED current per channel (mA) | 120 |
LED configuration | Parallel, Series, Single | Program memory | No |
Topology | Current Sink, Linear | Programmable ramp control | No |
Vin (min) (V) | 3 | Vin (max) (V) | 5.5 |
Iout (max) (A) | 1.92 | Features | I2C control |
Iq (typ) (mA) | 13 | Operating temperature range (°C) | -40 to 85 |
Rating | Catalog |
Shipping
Shipping Type | Ship Fee | Lead Time | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 days | |
Fedex | $20.00-$40.00 (0.50 KG) | 2-5 days | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 days | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 days | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 days | |
REGISTERED AIR MAIL | $20.00-$40.00 (0.50 KG) | 2-5 days |
Processing Time:Shipping fee depend on different zone and country.
Payment
Terms of payment | Hand Fee | |
---|---|---|
Wire Transfer | charge US$30.00 banking fee. | |
Paypal | charge 4.0% service fee. | |
Credit Card | charge 3.5% service fee. | |
Western Union | charge US.00 banking fee. | |
Money Gram | charge US$0.00 banking fee. |
Guarantees
1.The electronic components you purchase include 365 Days Warranty, We guarantee product quality.
2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.
Packing
-
Step1 :Product
-
Step2 :Vacuum packaging
-
Step3 :Anti-static bag
-
Step4 :Individual packaging
-
Step5 :Packaging boxes
-
Step6 :bar-code shipping tag
All the products will packing in anti-staticbag. Ship with ESD antistatic protection.
Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.
We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.
After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.
Part points
-
The TLC59116FIRHBR chip is a 16-channel Constant-Current LED Sink driver designed for high power LED lighting applications. It features 16 independent PWM control channels, a programmable 8-bit current control for each channel, and serial communication interface for easy control. This chip is commonly used in automotive, architectural, and general lighting applications.
-
Equivalent
The equivalent products of TLC59116FIRHBR chip are TLC59116, TLC59116F, TLC59116A, and TLC59116B. These are all 16-channel constant-current LED sink drivers with programmable PWM control. They are suitable for RGB full-color displays, LED billboards, and architectural lighting applications. -
Features
The TLC59116FIRHBR is a 16-channel Constant Current LED Sink Driver with an I2C interface. It features 16 PWM grayscale control channels, 262K color display, internal 8-bit PWM for each channel, and a 256-step global brightness control. It also has a register-based driver with programmable 8-bit linear dimming and an open-load detection and fault reporting function. -
Pinout
The TLC59116FIRHBR is a 16-channel constant-current LED driver with a 24-pin QFN package. It features individual PWM control for each channel, up to 17mA per channel, and a serial data interface for communication. The pin count includes VCC, GND, data in, and LED outputs. -
Manufacturer
The TLC59116FIRHBR is manufactured by Texas Instruments. Texas Instruments is a semiconductor company that designs and manufactures a range of products, including integrated circuits, particularly in the analog and digital signal processing segments. Its products are used in a variety of industries, such as automotive, industrial, and consumer electronics. -
Application Field
The TLC59116FIRHBR is commonly used in applications requiring high integration and PWM control of RGB LEDs, such as interior automotive lighting, smart home lighting systems, displays, and signage. It can also be used in industrial lighting, gaming peripherals, and consumer electronics. -
Package
The TLC59116FIRHBR chip comes in a TSSOP package type, with a surface-mount form. It measures 4.4mm x 3.0mm x 0.9mm in size.
We provide high quality products, thoughtful service and after sale guarantee
-
We have rich products, can meet your various needs.
-
Minimum order quantity starts from 1pcs.
-
Lowest international shipping fee starts from $0.00
-
365 days quality guarantee for all products