TPS61094DSSR
TPS61094DSSR is an IC designed for power management with DC/DC conversion capabilities
Brands: Texas Instruments
Mfr.Part #: TPS61094DSSR
Datasheet: TPS61094DSSR Datasheet (PDF)
Package/Case: WSON (DSS)-12
RoHS Status:
Stock Condition: 3815 pcs, New Original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
Add To BomTPS61094DSSR General Description
The TPS61094 is a 60-nA IQ boost converter with supercap management. The device provides a power supply solution for smart meter and super capacitor backup power applications.
The TPS61094 has a wide input voltage range and output voltage up to 5.5 V. When the TPS61094 works in buck mode and charges the supercap, the charging current and the termination voltage are programmable with two external resistors. When the TPS61094 works in boost mode, the output voltage is programmable with an external resistor.
During automatic buck or boost mode (EN = 1, MODE = 1), when the input power supply is applied, the device bypasses the input voltage to the output while it is capable of charging a backup supercap. When the input power supply is disconnected or lower than the output target voltage, the TPS61094 enters boost mode and regulates output voltage from a backup supercap. The TPS61094 consumes 60-nA quiescent current in this mode.
The TPS61094 supports true shutdown mode (EN = 0, MODE = 1) and the forced bypass mode (EN = 0, MODE = 0). In true shutdown mode, the TPS61094 completely disconnects the load from the input supply. When supporting forced bypass mode, the TPS61094 connects the load to the input voltage directly through a bypass switch and only consumes 4-nA current to achieve long battery life.
Features
- Wide voltage range and current range
- 0.7-V to 5.5-V input voltage range
- 1.8-V minimum input voltage for start-up
- Programmable boost output voltages, 2.7-V to 5.4-V setting range
- Programmable buck charging termination voltages, 1.7-V to 5.4-V setting range
- Programmable buck charging output currents, 2.5-mA to 600-mA setting range
- Ultra-low quiescent current
- 60 nA in boost mode or buck charging mode
- 4 nA in forced bypass mode
- High efficiency and power capability
- Typical 2.0-A inductor valley current limit
- Two 60-mΩ (LS) / 140-mΩ (HS) MOSFETs
- 100-mΩ bypass switch resistance
- 1-MHz switching frequency
- Auto snooze mode operation at light load
- Up to 92.3% efficiency at VIN = 3 V, VOUT = 3.6 V, and IOUT = 10 µA
- Up to 96.3% efficiency at VIN = 3 V, VOUT = 3.6 V, and IOUT = 100 mA
- Four operation modes controlled by the MODE and EN pins
- Rich protection
- Output short-circuit protection
- Thermal shutdown protection
- 2-mm × 3-mm 12-pin WSON package
Application
Specifications
Parameter | Value | Parameter | Value |
---|---|---|---|
Topology | Boost | Vin (min) (V) | 0.7 |
Vin (max) (V) | 5.5 | Vout (min) (V) | 2.7 |
Vout (max) (V) | 5.4 | Switch current limit (typ) (A) | 2 |
Type | Converter | Regulated outputs (#) | 1 |
Switching frequency (min) (kHz) | 500 | Switching frequency (max) (kHz) | 1000 |
Iq (typ) (mA) | 0.0001 | Features | Adjustable current limit, Bypass Mode, Enable, Light Load Efficiency, Synchronous Rectification, UVLO Fixed |
Duty cycle (max) (%) | 92 | Operating temperature range (°C) | -40 to 125 |
Rating | Catalog |
Shipping
Shipping Type | Ship Fee | Lead Time | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 days | |
Fedex | $20.00-$40.00 (0.50 KG) | 2-5 days | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 days | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 days | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 days | |
REGISTERED AIR MAIL | $20.00-$40.00 (0.50 KG) | 2-5 days |
Processing Time:Shipping fee depend on different zone and country.
Payment
Terms of payment | Hand Fee | |
---|---|---|
Wire Transfer | charge US$30.00 banking fee. | |
Paypal | charge 4.0% service fee. | |
Credit Card | charge 3.5% service fee. | |
Western Union | charge US.00 banking fee. | |
Money Gram | charge US$0.00 banking fee. |
Guarantees
1.The electronic components you purchase include 365 Days Warranty, We guarantee product quality.
2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.
Packing
-
Step1 :Product
-
Step2 :Vacuum packaging
-
Step3 :Anti-static bag
-
Step4 :Individual packaging
-
Step5 :Packaging boxes
-
Step6 :bar-code shipping tag
All the products will packing in anti-staticbag. Ship with ESD antistatic protection.
Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.
We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.
After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.
We provide high quality products, thoughtful service and after sale guarantee
-
We have rich products, can meet your various needs.
-
Minimum order quantity starts from 1pcs.
-
Lowest international shipping fee starts from $0.00
-
365 days quality guarantee for all products