ST STM32F103RCT7
ARM® Cortex®-M3 STM32F1 Microcontroller IC 32-Bit Single-Core 72MHz 256KB (256K x 8) FLASH 64-LQFP (10x10)
Brands: STMicroelectronics, Inc
Mfr.Part #: STM32F103RCT7
Datasheet: STM32F103RCT7 Datasheet (PDF)
Package/Case: LQFP-64
Product Type: ARM Microcontrollers - MCU
STM32F103RCT7 General Description
The STM32F103xC, STM32F103xD and STM32F103xE performance line family incorporates the high-performance ARM®Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 512 Kbytes and SRAM up to 64 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer three 12-bit ADCs, four general-purpose 16-bit timers plus two PWM timers, as well as standard and advanced communication interfaces: up to two I2Cs, three SPIs, two I2Ss, one SDIO, five USARTs, an USB and a CAN.The STM32F103xC/D/E high-density performance line family operates in the –40 to +105 °C temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.These features make the STM32F103xC/D/E high-density performance line microcontroller family suitable for a wide range of applications such as motor drives, application control, medical and handheld equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems video intercom, and HVAC.Evaluation board with STM32F103Zx MCU.STM32 Nucleo-64 development board with STM32F103.ST-LINK/V2 in-circuit debugger/programmer for ST.
Features
- Core: ARM® 32-bit Cortex®-M3 CPU
- 72 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access
- Single-cycle multiplication and hardware division
- Memories
- 256 to 512 Kbytes of Flash memory
- up to 64 Kbytes of SRAM
- Flexible static memory controller with 4 Chip Select. Supports Compact Flash, SRAM, PSRAM, NOR and NAND memories
- LCD parallel interface, 8080/6800 modes
- Clock, reset and supply management
- 2.0 to 3.6 V application supply and I/Os
- POR, PDR, and programmable voltage detector (PVD)
- 4-to-16 MHz crystal oscillator
- Internal 8 MHz factory-trimmed RC
- Internal 40 kHz RC with calibration
- 32 kHz oscillator for RTC with calibration
- Low power
- Sleep, Stop and Standby modes
- VBAT supply for RTC and backup registers
- 3 × 12-bit, 1 μs A/D converters (up to 21 channels)
- Conversion range: 0 to 3.6 V
- Triple-sample and hold capability
- Temperature sensor
- 2 × 12-bit D/A converters
- DMA: 12-channel DMA controller
- Supported peripherals: timers, ADCs, DAC, SDIO, I2Ss, SPIs, I2Cs and USARTs
- Debug mode
- Serial wire debug (SWD) & JTAG interfaces
- Cortex®-M3 Embedded Trace Macrocell™
- Up to 112 fast I/O ports
- 51/80/112 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant
- Up to 11 timers
- Up to four 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
- 2 × 16-bit motor control PWM timers with dead-time generation and emergency stop
- 2 × watchdog timers (Independent and Window)
- SysTick timer: a 24-bit downcounter
- 2 × 16-bit basic timers to drive the DAC
- Up to
Specifications
Parameter | Value | Parameter | Value |
---|---|---|---|
Manufacturer: | STMicroelectronics | Product Category: | ARM Microcontrollers - MCU |
RoHS: | Details | Series: | STM32F103RC |
Mounting Style: | SMD/SMT | Package / Case: | LQFP-64 |
Core: | ARM Cortex M3 | Program Memory Size: | 256 kB |
Data Bus Width: | 32 bit | ADC Resolution: | 12 bit |
Maximum Clock Frequency: | 72 MHz | Number of I/Os: | 51 I/O |
Data RAM Size: | 48 kB | Supply Voltage - Min: | 2 V |
Supply Voltage - Max: | 3.6 V | Minimum Operating Temperature: | - 40 C |
Maximum Operating Temperature: | + 105 C | Packaging: | Tray |
Brand: | STMicroelectronics | Data RAM Type: | SRAM |
Height: | 1.4 mm | Interface Type: | CAN, I2C, SPI, USART |
Length: | 10 mm | Moisture Sensitive: | Yes |
Number of ADC Channels: | 16 Channel | Number of Timers/Counters: | 11 Timer |
Processor Series: | ARM Cortex M | Product Type: | ARM Microcontrollers - MCU |
Program Memory Type: | Flash | Factory Pack Quantity: | 960 |
Subcategory: | Microcontrollers - MCU | Tradename: | STM32 |
Width: | 10 mm |
Shipping
Shipping Type | Ship Fee | Lead Time | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 days | |
Fedex | $20.00-$40.00 (0.50 KG) | 2-5 days | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 days | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 days | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 days | |
REGISTERED AIR MAIL | $20.00-$40.00 (0.50 KG) | 2-5 days |
Processing Time:Shipping fee depend on different zone and country.
Payment
Terms of payment | Hand Fee | |
---|---|---|
Wire Transfer | charge US$30.00 banking fee. | |
Paypal | charge 4.0% service fee. | |
Credit Card | charge 3.5% service fee. | |
Western Union | charge US.00 banking fee. | |
Money Gram | charge US$0.00 banking fee. |
Guarantees
1.The electronic components you purchase include 365 Days Warranty, We guarantee product quality.
2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.
Packing
-
Step1 :Product
-
Step2 :Vacuum packaging
-
Step3 :Anti-static bag
-
Step4 :Individual packaging
-
Step5 :Packaging boxes
-
Step6 :bar-code shipping tag
All the products will packing in anti-staticbag. Ship with ESD antistatic protection.
Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.
We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.
After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.
Part points
-
The STM32F103RCT7 chip is a microcontroller from STMicroelectronics that belongs to the STM32F1 series. It features an ARM Cortex-M3 core running at a maximum speed of 72 MHz, along with a variety of peripherals and memory options. It is widely used in industrial applications, consumer electronics, and other embedded systems that require reliable and efficient processing capabilities.
-
Equivalent
Some equivalents of the STM32F103RCT7 chip include the STM32F103C8T6, STM32F103CBT6, and STM32F103RBT6. These chips are similar in features and functionalities, but may differ in terms of package type, memory capacity, and pin count. -
Features
The STM32F103RCT7 microcontroller is based on the ARM Cortex-M3 core, runs at 72MHz, has 256KB flash memory, 48KB RAM, and is equipped with various communication interfaces such as SPI, I2C, USART, and USB. It also features a 12-bit ADC, timers, and GPIO pins, making it suitable for a wide range of applications. -
Pinout
The STM32F103RCT7 is a microcontroller with a 64-pin count. It is part of the STM32F1 series and features ARM Cortex-M3 core. The pins provide various functions such as GPIO, UART, SPI, I2C, ADC, DAC, timers, interrupts, and more. -
Manufacturer
STMicroelectronics is the manufacturer of the STM32F103RCT7. It is a multinational semiconductor and electronics company based in Geneva, Switzerland. STMicroelectronics is known for its wide range of products, including microcontrollers, sensors, power management, and communication devices. -
Application Field
The STM32F103RCT7 microcontroller can be used in various application areas, including industrial automation, motor control, power management, home appliances, and consumer electronics. It offers excellent performance, high-speed connectivity, and rich peripheral support, making it a versatile choice for a wide range of embedded systems. -
Package
The STM32F103RCT7 chip is available in a LQFP64 package type, has a form factor of Quad Flat Package, and has a size of 10mm x 10mm.
Datasheet PDF
We provide high quality products, thoughtful service and after sale guarantee
-
We have rich products, can meet your various needs.
-
Minimum order quantity starts from 1pcs.
-
Lowest international shipping fee starts from $0.00
-
365 days quality guarantee for all products
Ovaga always has the components I need in stock and they always work perfectly for my projects.