Microchip MIC5891YN
Power Switch/Driver 1:8 Bipolar 500mA 16-DIP
Brands: Microchip Technology, Inc
Mfr.Part #: MIC5891YN
Datasheet: MIC5891YN Datasheet (PDF)
Package/Case: PDIP-16
Product Type: Power Management ICs
MIC5891YN General Description
The MIC5891 latched driver is a high-voltage, high current integrated circuit comprised of eight CMOS data latches, CMOS control circuitry for the common STROBE and OUTPUT ENABLE, and bipolar Darlington transistor drivers for each latch.Bipolar/MOS construction provides extremely low power latches with maximum interface flexibility.The MIC5891 will typically operate at 5MHz with a 5V logic supply.The CMOS inputs are compatible with standard CMOS, PMOS, and NMOS logic levels. TTL circuits may be used with appropriate pull-up resistors to ensure a proper logic-high input.A CMOS serial data output allows additional drivers to be cascaded when more than 8 bits are required.The MIC5891 has open-emitter outputs with suppression diodes for protection against inductive load transients. The output transistors are capable of sourcing 500mA and will sustain at least 35V in the on-state.Simultaneous operation of all drivers at maximum rated current requires a reduction in duty cycle due to package power limitations. Outputs may be paralleled for higher load current capability.The MIC5891 is available in a 16-pin plastic DIP package (N) and 16-pin wide SOIC package (WM).
Features
- High-voltage, high-current outputs
- Output transient protection diodes
- CMOS-, PMOS-, NMOS-, and TTL-compatible inputs
- 5MHz typical data input rate
- Low-power CMOS latches
Specifications
Parameter | Value | Parameter | Value |
---|---|---|---|
Manufacturer: | Microchip | Product Category: | Latches |
RoHS: | Y | Number of Circuits: | 1 Circuit |
Logic Type: | CMOS | Logic Family: | TTL |
Polarity: | Non-Inverting | Number of Output Lines: | 9 Line |
Supply Voltage - Max: | 12 V | Supply Voltage - Min: | 5 V |
Minimum Operating Temperature: | - 40 C | Maximum Operating Temperature: | + 85 C |
Package / Case: | PDIP-16 | Packaging: | Tube |
Series: | MIC5891 | Brand: | Microchip Technology / Micrel |
Mounting Style: | Through Hole | Number of Input Lines: | 1 Line |
Operating Supply Current: | 10 mA | Product Type: | Latches |
Factory Pack Quantity: | 25 | Subcategory: | Logic ICs |
Unit Weight: | 0.057419 oz |
Shipping
Shipping Type | Ship Fee | Lead Time | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 days | |
Fedex | $20.00-$40.00 (0.50 KG) | 2-5 days | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 days | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 days | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 days | |
REGISTERED AIR MAIL | $20.00-$40.00 (0.50 KG) | 2-5 days |
Processing Time:Shipping fee depend on different zone and country.
Payment
Terms of payment | Hand Fee | |
---|---|---|
Wire Transfer | charge US$30.00 banking fee. | |
Paypal | charge 4.0% service fee. | |
Credit Card | charge 3.5% service fee. | |
Western Union | charge US.00 banking fee. | |
Money Gram | charge US$0.00 banking fee. |
Guarantees
1.The electronic components you purchase include 365 Days Warranty, We guarantee product quality.
2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.
Packing
-
Step1 :Product
-
Step2 :Vacuum packaging
-
Step3 :Anti-static bag
-
Step4 :Individual packaging
-
Step5 :Packaging boxes
-
Step6 :bar-code shipping tag
All the products will packing in anti-staticbag. Ship with ESD antistatic protection.
Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.
We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.
After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.
Part points
-
The MIC5891YN is a high voltage, high current 8-bit serial-in parallel-out Shift Register with latch and constant current output drivers. It is commonly used for driving high-power LED displays, allowing control of each individual LED. The chip operates using a serial input bit stream and can be cascaded to control multiple displays. It provides a convenient solution for driving a large number of LEDs in various applications, including signage and lighting.
-
Equivalent
There are several equivalent products to the MIC5891YN chip, such as ULN2001A, ULN2803A, and ULN2804A. These chips serve the same purpose and have similar functionality, allowing for the control of high-voltage/high-current loads using low-voltage microcontrollers or logic-level signals. -
Features
MIC5891YN is a high-voltage, high-current, darlington transistor array. It has seven open collector outputs, capable of sourcing up to 50V and 500mA. The device offers features like low active output pull-up, input compatibility with various logic, and high-voltage outputs that can drive inductive loads. -
Pinout
The MIC5891YN has a pin count of 16. It is a high-current 8-bit shift register/latch with output enable. It is designed to drive high-current displays such as LED or incandescent lamps, making it suitable for applications requiring a high level of drive capability. -
Manufacturer
The MIC5891YN is manufactured by Microchip Technology Inc. It is a leading provider of microcontroller, analog, and semiconductor products. Microchip Technology Inc. specializes in designing, developing, and manufacturing integrated circuits for a wide range of applications in various industries, including automotive, consumer electronics, medical, and industrial markets. -
Application Field
The MIC5891YN is a high-voltage, high-current shift register commonly used in multiplexing and driving various displays such as LED matrices, dot-matrix displays, and segmented displays. It is also suitable for driving relays, lamps, and other high-current loads in various industrial and automotive applications. -
Package
The MIC5891YN chip is in a DIP (Dual Inline Package) form with a size of 16 pins.
Datasheet PDF
We provide high quality products, thoughtful service and after sale guarantee
-
We have rich products, can meet your various needs.
-
Minimum order quantity starts from 1pcs.
-
Lowest international shipping fee starts from $0.00
-
365 days quality guarantee for all products
I have yet to find electronic components that rival those from Ovaga.