ON MC100EP142FAG
ECL 9-Bit Shift Register
Brands: Onsemi
Mfr.Part #: MC100EP142FAG
Datasheet: MC100EP142FAG Datasheet (PDF)
Package/Case: LQFP-32
Product Type: Logic ICs
RoHS Status:
Stock Condition: 3314 pcs, New Original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
Add To BomMC100EP142FAG General Description
The MC10EP/100EP142 is a 9-bit shift register, designed with byte-parity applications in mind. The E142 performs serial/parallel in and serial/parallel out, shifting in one direction. The nine inputs D0 - D8 accept parallel input data, while S-IN accepts serial input data. The Qn outputs do not need to be terminated for the shift operation to function. To minimize noise and power, any Q output not used should be left unterminated.
The SEL (Select) input pin is used to switch between the two modes of operation - SHIFT and LOAD. The shift direction is from bit 0 to bit 8. Input data is accepted by the registers a set-up time before the positive going edge of CLK0 or CLK1; shifting is also accomplished on the positive clock edge. A HIGH on the Master Reset pin (MR) asynchronously resets all the resisters to zero.
The 100 Series contains temperature compensation.
Features
- > 3 GHz Minimum Shift Frequency
- 9-Bit for Byte-Parity Applications
- Asynchronous Master Reset
- Dual Clocks
- PECL Mode Operating Range: VCC = 3.0 V to 5.5 V with VEE = 0 V
- NECL Mode Operating Range: VCC = 0 V with VEE = –3.0 V to –5.5 V
- Open Input Default State
- Safety Clamp on Inputs
Application
- Byte parity
Specifications
Parameter | Value | Parameter | Value |
---|---|---|---|
Status | Active | Compliance | PbAHP |
Package Type | LQFP-32 | Case Outline | 561AB |
MSL Type | 2 | MSL Temp (°C) | 260 |
Container Type | JTRAY | Container Qty. | 250 |
ON Target | Y | Type | Shift Register |
Bits | 9 | Input Level | ECL |
Output Level | ECL | VCC Typ (V) | 5 |
tJitter Typ (ps) | 1 | tpd Typ (ns) | 0.675 |
tsu Min (ns) | 0.05 | th Min (ns) | 0.1 |
trec Typ (ns) | 0.8 | tR & tF Max (ps) | 250 |
fToggle Typ (MHz) | 2800 |
Shipping
Shipping Type | Ship Fee | Lead Time | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 days | |
Fedex | $20.00-$40.00 (0.50 KG) | 2-5 days | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 days | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 days | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 days | |
REGISTERED AIR MAIL | $20.00-$40.00 (0.50 KG) | 2-5 days |
Processing Time:Shipping fee depend on different zone and country.
Payment
Terms of payment | Hand Fee | |
---|---|---|
Wire Transfer | charge US$30.00 banking fee. | |
Paypal | charge 4.0% service fee. | |
Credit Card | charge 3.5% service fee. | |
Western Union | charge US.00 banking fee. | |
Money Gram | charge US$0.00 banking fee. |
Guarantees
1.The electronic components you purchase include 365 Days Warranty, We guarantee product quality.
2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.
Packing
-
Step1 :Product
-
Step2 :Vacuum packaging
-
Step3 :Anti-static bag
-
Step4 :Individual packaging
-
Step5 :Packaging boxes
-
Step6 :bar-code shipping tag
All the products will packing in anti-staticbag. Ship with ESD antistatic protection.
Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.
We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.
After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.
Part points
-
The MC100EP142FAG chip is an advanced high-speed dual 1:4 differential ECL-to-LVPECL fanout buffer. It provides low-skew outputs with propagation delays less than 800ps. It operates from a single -3.3V power supply and is available in a small footprint package. This chip is commonly used in applications where high-speed signal distribution is required, such as clock distribution networks and data communication systems.
-
Equivalent
Some equivalent products of the MC100EP142FAG chip include the MC100EP142FA, MC100EL142FAG, MC10EP142FAG, and MC100EP142FAR2G. These chips are all part of the same family of 3.3 V/5 V ECL 2-input XOR/XNOR gate ICs and can be used as substitutes for the MC100EP142FAG. -
Features
The MC100EP142FAG is a low-skew, high-speed 4-bit registered transceiver designed for applications requiring skew compensation and signal synchronization. It features differential inputs and outputs, operating at a maximum frequency of 2.5 GHz, with a typical propagation delay of 370 ps. -
Pinout
The MC100EP142FAG is a 1:5 differential ECL-to-ECL/PECL clock and data fanout buffer. It has a pin count of 20 and the main function is to distribute and amplify clock or data signals in high-speed digital systems. -
Manufacturer
The manufacturer of the MC100EP142FAG is ON Semiconductor. It is an American company that specializes in designing and manufacturing semiconductor components for various industries, including automotive, communications, industrial, and medical sectors. -
Application Field
The MC100EP142FAG is a high-speed differential 2:1 multiplexer with ECL/TTL outputs. It can be used in various applications including telecommunications, data communication, networking, industrial automation, and instrumentation. -
Package
The package type of the MC100EP142FAG chip is a 32-LQFP (Low Profile Quad Flat Package). The form of the chip is surface mount. The size of the chip is 7mm x 7mm.
Datasheet PDF
We provide high quality products, thoughtful service and after sale guarantee
-
We have rich products, can meet your various needs.
-
Minimum order quantity starts from 1pcs.
-
Lowest international shipping fee starts from $0.00
-
365 days quality guarantee for all products