TI TLC59208FIPWR
LED Driver IC 8 Output Linear PWM Dimming 50mA 16-TSSOP
Brands: TI
Mfr.Part #: TLC59208FIPWR
Datasheet: TLC59208FIPWR Datasheet (PDF)
Package/Case: TSSOP-16
Product Type: LED Drivers
RoHS Status:
Stock Condition: 6703 pcs, New Original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
Add To BomTLC59208FIPWR General Description
The TLC59208F is an I2C bus controlled 8-bit LED driver optimized for red/green/blue/amber (RGBA) color mixing applications. Each LED output has its own 8-bit resolution (256 steps) fixed frequency individual PWM controller that operates at 97 kHz with a duty cycle that is adjustable from 0% to 99.6% to allow the LED to be set to a specific brightness value.
An additional 8-bit resolution (256 steps) group PWM controller has both a fixed frequency of 190 Hz and an adjustable frequency between 24 Hz to once every 10.73 seconds with a duty cycle that is adjustable from 0% to 99.6% that is used to either dim or blink all LEDs with the same value.
Each LED output can be off, on (no PWM control), set at its individual PWM controller value or at both individual and group PWM controller values. The TLC59208F operates with a supply voltage range of 3 V to 5.5 V and the outputs are 17 V tolerant. LEDs can be directly connected to the TLC59208F device outputs.
Software programmable LED Group and three Sub Call I2C bus addresses allow all or defined groups of TLC59208F devices to respond to a common I2C bus address, allowing for example, all the same color LEDs to be turned on or off at the same time or marquee chasing effect, thus minimizing I2C bus commands.
Three hardware address pins allow up to 64 devices on the same bus.
The software reset (SWRST) Call allows the master to perform a reset of the TLC59208F through the I2C bus, identical to the power-on reset (POR) that initializes the registers to their default state causing the outputs to be set high (LED off). This allows an easy and quick way to reconfigure all device registers to the same condition.
Features
- Eight LED Drivers (Each Output Programmable at OFF,
ON, Programmable LED Brightness, Programmable Group
Dimming/Blinking Mixed With Individual LED Brightness) - Eight Open-Drain Output Channels
- 256-Step (8-Bit) Linear Programmable Brightness Per
LED Output Varying From Fully Off (Default) to Maximum
Brightness Using a 97-kHz PWM Signal - 256-Step Group Brightness Control Allows General
Dimming [Using a 190-Hz PWM Signal From Fully Off
to Maximum Brightness (Default)] - 256-Step Group Blinking With Frequency Programmable
From 24 Hz to 10.73 s and Duty Cycle From 0% to 99.6% - 64 Programmable Slave Addresses Using Three Hardware
Address Pins - Four Software Programmable I2C Bus Addresses
(One LED Group Call Address and Three LED Sub Call
Addresses) Allow Groups of Devices to be Simultaneously
Addressed Any Combination (For Example, One Register
Used for ‘All Call’ so That All the TLC59208Fs
on the I2C Bus Can be Simultaneously Addressed
and the Second Register Used for Three Different Addresses
so That One Third of All Devices on the Bus Can be
Simultaneously Addressed) - Software Enable and Disable for I2C Bus
Address - Software Reset Feature (SWRST Call) Allows the Device
to be Reset Through the I2C Bus - Up to 14 Possible Hardware Adjustable Individual I2C
Bus Addresses Per Device so That Each Device Can be
Programmed - Up to 64 Possible Hardware Adjustable Individual I2C
Bus Addresses Per Device so That Each Device Can be
Programmed Individually - Output State Change Programmable on the Acknowledge or
the STOP Command to Update Outputs Byte-by-Byte or All
at the Same Time (Default to ) - Maximum Output Current: 50 mA
- Maximum Output Voltage: 17 V
- 25-MHz Internal Oscillator Requires no External Components
- 1-MHz Fast-Mode Plus (FM+) Compatible I2C
Bus Interface With 30-mA High Drive Capability
on SDA Output for Driving High Capacitive Buses - Internal Power-On Reset
- Noise Filter on SCL/SDA Inputs
- No Glitch on Power Up
- Active-Low Reset (RESET)
- Supports Hot Insertion
- Low Standby Current
- 3.3-V or 5-V Supply Voltage
- 5.5-V Tolerant Inputs
- Packages Offered: 16-Pin Thin Shrink Small-Outline Package
[TSSOP (PW)], 16-Pin Quad Flatpack No Lead [QFN (RGY)] - –40°C to 85°C Operation
Specifications
Parameter | Value | Parameter | Value |
---|---|---|---|
Number of channels | 8 | LED current per channel (mA) | 50 |
LED configuration | Parallel, Series, Single | Program memory | No |
Topology | Current Sink, Linear | Vin (min) (V) | 3 |
Vin (max) (V) | 5.5 | Iout (max) (A) | 0.4 |
Features | I2C control | Iq (typ) (mA) | 5 |
Operating temperature range (°C) | -40 to 85 |
Shipping
Shipping Type | Ship Fee | Lead Time | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 days | |
Fedex | $20.00-$40.00 (0.50 KG) | 2-5 days | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 days | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 days | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 days | |
REGISTERED AIR MAIL | $20.00-$40.00 (0.50 KG) | 2-5 days |
Processing Time:Shipping fee depend on different zone and country.
Payment
Terms of payment | Hand Fee | |
---|---|---|
Wire Transfer | charge US$30.00 banking fee. | |
Paypal | charge 4.0% service fee. | |
Credit Card | charge 3.5% service fee. | |
Western Union | charge US.00 banking fee. | |
Money Gram | charge US$0.00 banking fee. |
Guarantees
1.The electronic components you purchase include 365 Days Warranty, We guarantee product quality.
2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.
Packing
-
Step1 :Product
-
Step2 :Vacuum packaging
-
Step3 :Anti-static bag
-
Step4 :Individual packaging
-
Step5 :Packaging boxes
-
Step6 :bar-code shipping tag
All the products will packing in anti-staticbag. Ship with ESD antistatic protection.
Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.
We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.
After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.
Part points
-
The TLC59208FIPWR chip is an 8-channel constant current LED driver that can control up to 8 individual LEDs. It uses a serial interface to communicate with a microcontroller, allowing for easy integration into LED lighting systems. The chip is also designed to provide consistent and precise current control, making it ideal for high-performance LED applications.
-
Equivalent
Some equivalent products to the TLC59208FIPWR chip are the TLC59208IPWR, TLC59208AWSRG4, and TLC59208IRGER. These chips are also 16-channel constant-current LED sink drivers with serial input. They offer similar functionality and features, making them suitable replacements for the TLC59208FIPWR in certain applications. -
Features
Some features of TLC59208FIPWR include 12-bit grayscale PWM control, 8 channels of constant-current sink drivers, thermal shutdown protection, and a wide supply voltage range. It also has built-in open LED detection and 30-MHz clock frequency. -
Pinout
The TLC59208FIPWR is an 8-bit constant-current LED driver with 28 pins. It is designed to drive LED displays in various applications, providing LED brightness control through an I2C interface. Its functions include PWM brightness control, thermal shutdown protection, and open-circuit detection. -
Manufacturer
The TLC59208FIPWR is manufactured by Texas Instruments, a leading manufacturer of semiconductors and integrated circuits. They are a multinational company that designs and produces a wide range of products for industries such as automotive, communications, consumer electronics, and more. Their products are known for their quality, reliability, and innovative technology. -
Application Field
The TLC59208FIPWR is a 8-channel constant current LED driver designed for driving high-power LED applications such as automotive lighting, LCD backlighting, and industrial lighting. It can also be used in general lighting, advertising displays, and entertainment lighting applications where precise control of multiple LED channels is required. -
Package
The TLC59208FIPWR chip is housed in a TSSOP package with a total of 20 pins. It is in surface mount form and has a size of 4.4mm x 5mm.
We provide high quality products, thoughtful service and after sale guarantee
-
We have rich products, can meet your various needs.
-
Minimum order quantity starts from 1pcs.
-
Lowest international shipping fee starts from $0.00
-
365 days quality guarantee for all products