ST STM32F101VCT6
ARM® Cortex®-M3 STM32F1 Microcontroller IC 32-Bit Single-Core 36MHz 256KB (256K x 8) FLASH 100-LQFP (14x14)
Brands: STMicroelectronics, Inc
Mfr.Part #: STM32F101VCT6
Datasheet: STM32F101VCT6 Datasheet (PDF)
Package/Case: LQFP-100
Product Type: Embedded Processors & Controllers
STM32F101VCT6 General Description
The STM32F101xC, STM32F101xD and STM32F101xE access line family incorporates the high-performance ARM®Cortex®-M3 32-bit RISC core operating at a 36 MHz frequency, high-speed embedded memories (Flash memory up to 512 Kbytes and SRAM up to 48 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer one 12-bit ADC, four general-purpose 16-bit timers, as well as standard and advanced communication interfaces: up to two I2Cs, three SPIs and five USARTs.The STM32F101xx high-density access line family operates in the –40 to +85 °C temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.These features make the STM32F101xx high-density access line microcontroller family suitable for a wide range of applications such as medical and handheld equipment, PC peripherals and gaming, GPS platforms, industrial applications, PLC, printers, scanners alarm systems and video intercom.ST-LINK/V2 in-circuit debugger/programmer for ST.Evaluation board with STM32F103Zx MCU.
Features
- Core: ARM®32-bit Cortex®-M3 CPU
- 36 MHz maximum frequency,1.25 DMIPS/MHz (Dhrystone 2.1) performance
- Single-cycle multiplication and hardware division
- Memories
- 256 to 512 Kbytes of Flash memory
- up to 48 Kbytes of SRAM
- Flexible static memory controller with 4 Chip Select. Supports Compact Flash, SRAM, PSRAM, NOR and NAND memories
- LCD parallel interface, 8080/6800 modes
- Clock, reset and supply management
- 2.0 to 3.6 V application supply and I/Os
- POR, PDR, and programmable voltage detector (PVD)
- 4-to-16 MHz crystal oscillator
- Internal 8 MHz factory-trimmed RC
- Internal 40 kHz RC with calibration capability
- 32 kHz oscillator for RTC with calibration
- Low power
- Sleep, Stop and Standby modes
- VBATsupply for RTC and backup registers
- 1 x 12-bit, 1 μs A/D converters (up to 16 channels)
- Conversion range: 0 to 3.6 V
- Temperature sensor
- 2 × 12-bit D/A converters
- DMA
- 12-channel DMA controller
- Peripherals supported: timers, ADC, DAC, SPIs, I2Cs and USARTs
- Up to 112 fast I/O ports
- 51/80/112 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant
- Debug mode
- Serial wire debug (SWD) & JTAG interfaces
- Cortex-M3 Embedded Trace Macrocell™
- Up to 9 timers
- Up to four 16-bit timers, each with up to 4 IC/OC/PWM or pulse counters
- 2 × watchdog timers (Independent and Window)
- SysTick timer: a 24-bit downcounter
- 2 × 16-bit basic timers to drive the DAC
- Up to 10 communication interfaces
- Up to 2 x I2C interfaces (SMSTM32F101xC, STM32F101xD, STM32F101xE7816 interface, LIN, IrDA capability, modem control)
- Up to 3 SPIs (18 Mbit/s)
Application
- Industrial automation and control systems
- Consumer electronics
- Medical devices
- Home appliances
- Internet of Things (IoT) devices
- Motor control and robotics
- Power tools
- Gaming devices
- Human-machine interfaces (HMI)
Specifications
Parameter | Value | Parameter | Value |
---|---|---|---|
Product Name | STM32F101VCT6 | Product Type | Microcontroller |
Manufacturer | STMicroelectronics | Series | STM32F1 Series |
Core Processor | ARM Cortex-M3 | Core Size | 32-Bit |
Speed | 72MHz | Connectivity | CAN, I²C, IrDA, LIN, SPI, UART/USART |
Peripherals | DMA, POR, PDR, PWM, WDT, ADC | Number of I/Os | 37 |
Program Memory Size | 256KB (256K x 8) | Data RAM Size | 48KB |
Voltage - Supply | 2 V ~ 3.6 V | Operating Temperature | -40°C ~ 85°C |
Mounting Type | Surface Mount |
Shipping
Shipping Type | Ship Fee | Lead Time | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 days | |
Fedex | $20.00-$40.00 (0.50 KG) | 2-5 days | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 days | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 days | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 days | |
REGISTERED AIR MAIL | $20.00-$40.00 (0.50 KG) | 2-5 days |
Processing Time:Shipping fee depend on different zone and country.
Payment
Terms of payment | Hand Fee | |
---|---|---|
Wire Transfer | charge US$30.00 banking fee. | |
Paypal | charge 4.0% service fee. | |
Credit Card | charge 3.5% service fee. | |
Western Union | charge US.00 banking fee. | |
Money Gram | charge US$0.00 banking fee. |
Guarantees
1.The electronic components you purchase include 365 Days Warranty, We guarantee product quality.
2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.
Packing
-
Step1 :Product
-
Step2 :Vacuum packaging
-
Step3 :Anti-static bag
-
Step4 :Individual packaging
-
Step5 :Packaging boxes
-
Step6 :bar-code shipping tag
All the products will packing in anti-staticbag. Ship with ESD antistatic protection.
Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.
We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.
After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.
Equivalent Parts
For the STM32F101VCT6 component, you may consider these replacement and alternative parts:
Part Number
Brands
Package
Description
Part Number : STM32F103VCT6
Brands :
Package :
Description : STM32F103VCT6: Similar microcontroller with more flash memory and additional features.
Part Number : STM32F100VCT6
Brands :
Package : LQFP-100
Description : STM32F100VCT6: Similar microcontroller with less flash memory but lower cost.
Part points
-
The STM32F101VCT6 is a 32-bit microcontroller chip from STMicroelectronics, part of the STM32F1 series. It features an ARM Cortex-M3 core running at up to 36 MHz, 256 KB flash memory, 32 KB of RAM, and a variety of peripherals including I2C, SPI, USART, and ADC. It is a versatile and cost-effective solution for a wide range of embedded applications.
-
Equivalent
Some equivalent products of the STM32F101VCT6 chip include STM32F103VCT6, STM32F100VCT6, STM32F105VCT6, and STM32F107VCT6. These chips are part of the STM32F1 series of microcontrollers manufactured by STMicroelectronics and offer similar performance and functionality. -
Features
The STM32F101VCT6 is a 32-bit microcontroller with 128KB Flash memory and 20KB RAM. It has 37 GPIO pins and supports clock speeds up to 36 MHz. It also features 4 timers, SPI, I2C, USART interfaces, and a 12-bit ADC. The device operates on a voltage range of 2.0V to 3.6V. -
Pinout
The STM32F101VCT6 is a microcontroller with 48 pins. It features an Arm Cortex-M3 core, 256KB Flash memory, 36KB SRAM, multiple communication interfaces, and various peripherals for developing embedded applications. -
Manufacturer
STMicroelectronics is the manufacturer of the STM32F101VCT6. It is a multinational semiconductor company that designs and manufactures a wide range of electronics products, including microcontrollers, sensors, and power management components. STMicroelectronics caters to a variety of industries, including automotive, industrial, and consumer electronics. -
Application Field
The STM32F101VCT6 microcontroller is commonly used in consumer electronics, industrial control systems, automotive applications, and medical devices. It can also be found in smart home devices, power tools, and portable communication equipment. Its features, such as low power consumption and high performance, make it suitable for a wide range of applications. -
Package
The STM32F101VCT6 chip comes in a LQFP package type, with a surface mount form. The size of the package is 48 pins (7x7 mm).
Datasheet PDF
We provide high quality products, thoughtful service and after sale guarantee
-
We have rich products, can meet your various needs.
-
Minimum order quantity starts from 1pcs.
-
Lowest international shipping fee starts from $0.00
-
365 days quality guarantee for all products
Highly recommended for anyone in need of quality components.