Images are for reference only See Product Specifications
ST STM32F429BGT6
ARM® Cortex®-M4 STM32F4 Microcontroller IC 32-Bit Single-Core 180MHz 1MB (1M x 8) FLASH 208-LQFP (28x28)
Brands: STMicroelectronics, Inc
Mfr.Part #: STM32F429BGT6
Datasheet: STM32F429BGT6 Datasheet (PDF)
Package/Case: 208-LQFP
Product Type: Embedded Processors & Controllers
STM32F429BGT6 General Description
The STM32F427xx and STM32F429xx devices are based on the high-performance Arm®Cortex®-M4 32-bit RISC core operating at a frequency of up to 180 MHz. The Cortex-M4 core features a Floating point unit (FPU) single precision which supports all Arm® single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security.The STM32F427xx and STM32F429xx devices incorporate high-speed embedded memories (Flash memory up to 2 Mbyte, up to 256 Kbytes of SRAM), up to 4 Kbytes of backup SRAM, and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB buses and a 32-bit multi-AHB bus matrix.All devices offer three 12-bit ADCs, two DACs, a low-power RTC, twelve general-purpose 16-bit timers including two PWM timers for motor control, two general-purpose 32-bit timers. They also feature standard and advanced communication interfaces.Discovery kit with STM32F429ZI MCU * New order c.Evaluation board with STM32F439NI MCU.STM32 Nucleo-144 development board with STM32F42.ST-LINK/V2 in-circuit debugger/programmer for ST.Evaluation board with STM32F429NI MCU.
Features
- Core: Arm® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution from Flash memory, frequency up to 180 MHz, MPU, 225 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions
- Memories
- Up to 2 MB of Flash memory organized into two banks allowing read-while-write
- Up to 256+4 KB of SRAM including 64-KB of CCM (core coupled memory) data RAM
- Flexible external memory controller with up to 32-bit data bus: SRAM, PSRAM, SDRAM/LPSDR SDRAM, Compact Flash/NOR/NAND memories
- LCD parallel interface, 8080/6800 modes
- LCD-TFT controller with fully programmable resolution (total width up to 4096 pixels, total height up to 2048 lines and pixel clock up to 83 MHz)
- Chrom-ART Accelerator™ for enhanced graphic content creation (DMA2D)
- Clock, reset and supply management
- 1.7 V to 3.6 V application supply and I/Os
- POR, PDR, PVD and BOR
- 4-to-26 MHz crystal oscillator
- Internal 16 MHz factory-trimmed RC (1% accuracy)
- 32 kHz oscillator for RTC with calibration
- Internal 32 kHz RC with calibration
- Sleep, Stop and Standby modes
- VBAT supply for RTC, 20×32 bit backup registers + optional 4 KB backup SRAM
- Low power
- Sleep, Stop and Standby modes
- VBAT supply for RTC, 20×32 bit backup registers + optional 4 KB backup SRAM
- 3×12-bit, 2.4 MSPS ADC: up to 24 channels and 7.2 MSPS in triple interleaved mode
- 2×12-bit D/A converters
- General-purpose DMA: 16-stream DMA controller with FIFOs and burst support
- Up to 17 timers: up to twelve 16-bit and two 32-bit timers up to 180 MHz, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
- Debug mode
- SWD & JTAG interfaces
- Cortex-M4 Trace Macrocell™
- Up to 168 I/O ports with interrupt capability<
Specifications
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Pin Count | 208 | Package Category | Quad Flat Packages |
| Released Date | Feb 7, 2021 |
Shipping
| Shipping Type | Ship Fee | Lead Time | |
|---|---|---|---|
 |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 days |
 |
Fedex | $20.00-$40.00 (0.50 KG) | 2-5 days |
 |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 days |
 |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 days |
 |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 days |
 |
REGISTERED AIR MAIL | $20.00-$40.00 (0.50 KG) | 2-5 days |
Processing Time：Shipping fee depend on different zone and country.
Payment
| Terms of payment | Hand Fee | |
|---|---|---|
 |
Wire Transfer | charge US$30.00 banking fee. |
 |
Paypal | charge 4.0% service fee. |
 |
Credit Card | charge 3.5% service fee. |
 |
Western Union | charge US.00 banking fee. |
 |
Money Gram | charge US$0.00 banking fee. |
Guarantees
1.The electronic components you purchase include 365 Days Warranty, We guarantee product quality.
2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.
Packing
-
Step1 :Product
-
Step2 :Vacuum packaging
-
Step3 :Anti-static bag
-
Step4 :Individual packaging
-
Step5 :Packaging boxes
-
Step6 :bar-code shipping tag
All the products will packing in anti-staticbag. Ship with ESD antistatic protection.
Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.
We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.
After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.
Part points
-
The STM32F429BGT6 chip is a microcontroller unit from STMicroelectronics that belongs to the STM32F4 series. It features an ARM Cortex-M4 processor with floating-point unit (FPU) and offers a wide range of peripherals and memory options. The chip is commonly used in various applications, including industrial controls, IoT devices, and consumer electronics, due to its high performance, low power consumption, and extensive development ecosystem.
-
Equivalent
Some equivalent products to the STM32F429BGT6 chip are: STM32F429BIT6, STM32F429BGT7, and STM32F429BGT6E. -
Features
Features of the STM32F429BGT6 include a 32-bit ARM Cortex-M4 processor, 180 MHz speed, 2 MB flash memory, 256 KB RAM, multiple communication interfaces (UART, SPI, I2C), up to 22 timers, USB OTG, and an LCD-TFT controller supporting up to 640x480 resolution. It is ideal for applications requiring high-performance and graphical user interfaces. -
Pinout
The STM32F429BGT6 microcontroller has 176 pins. It is a high-performance ARM Cortex-M4 based microcontroller with 180MHz frequency, 2MB flash memory, and 256KB RAM. It supports various interfaces such as USB, Ethernet, and CAN. Additionally, it has a rich set of functions including digital and analog I/O, timers, and communication peripherals. -
Manufacturer
STMicroelectronics is the manufacturer of the STM32F429BGT6. It is a multinational semiconductor company specializing in the design, manufacturing, and sale of a wide range of electronic components. STMicroelectronics operates in various markets, including automotive, industrial, consumer electronics, and telecommunications, offering customers solutions for smart devices, embedded systems, and power management. -
Application Field
The STM32F429BGT6 microcontroller is commonly used in various application areas such as industrial automation, robotics, medical devices, consumer electronics, and IoT applications. It offers a wide range of features and peripherals, making it suitable for diverse sectors requiring high performance and efficient processing capabilities. -
Package
The STM32F429BGT6 chip comes in a 208-pin LQFP package type. It has a quad flat package (QFP) form with a size of 28mm x 28mm.
Datasheet PDF
We provide high quality products, thoughtful service and after sale guarantee
-
We have rich products, can meet your various needs.
-
Minimum order quantity starts from 1pcs.
-
Lowest international shipping fee starts from $0.00
-
365 days quality guarantee for all products
We appreciate the competitive pricing and high-quality components we receive from Ovaga.