TI ISO35TDWR
RS422, RS485 Digital Isolator 2500Vrms 3 Channel 1Mbps 25kV/µs CMTI 16-SOIC (0.295", 7.50mm Width)
Brands: Texas Instruments
Mfr.Part #: ISO35TDWR
Datasheet: ISO35TDWR Datasheet (PDF)
Package/Case: SOIC-16
Product Type: Digital Isolators
RoHS Status:
Stock Condition: 9391 pcs, New Original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
Add To BomISO35TDWR General Description
The ISO35T is an isolated differential line transceiver with integrated oscillator outputs that provide the primary voltage for an isolation transformer. The device is a full-duplex differential line transceiver for RS-485 and RS-422 applications that can easily be configured for half-duplex operation by connecting pin 11 to pin 14, and pin 12 to pin 13.
These devices are ideal for long transmission lines since the ground loop is broken to allow for a much larger common-mode voltage range. The symmetrical isolation barrier of the device is tested to provide 4242VPK of isolation per VDE for 60s between the bus-line transceiver and the logic-level interface.
Any cabled I/O can be subjected to electrical noise transients from various sources. These noise transients can cause damage to the transceiver and/or near-by sensitive circuitry if they are of sufficient magnitude and duration. The ISO35T can significantly reduce the risk of data corruption and damage to expensive control circuits.
The ISO35T is specified for use from 40°C to 85°C.
Features
- Designed for RS-485 and RS-422 Applications
- Signaling Rates up to 1 Mbps
- 1/8 Unit Load – up to 256 Nodes on a Bus
- Thermal Shutdown Protection
- Typical Efficiency > 60% (ILOAD = 100 mA)
- See SLUU470 - Low-Driver Bus Capacitance 16 pF (Typical)
- Fail-Safe Receiver for Bus Open, Short, Idle
- Logic Inputs are 5-V Tolerant
- 50-kV/µs Typical Transient Immunity
- Bus-Pin ESD Protection
- 16-kV HBM Between Bus-Pins and GND2
- 6-kV HBM Between Bus-Pins and GND1
- Safety and Regulatory Approvals
- 4242 VPK Basic Insulation per DIN V VDE V
0884-10 and DIN EN 61010-1 - 2500 VRMS Isolation for 1 minute per UL 1577
- CSA Component Acceptance Notice 5A, IEC
60950-1 and IEC 61010-1 Standards
- 4242 VPK Basic Insulation per DIN V VDE V
Specifications
Parameter | Value | Parameter | Value |
---|---|---|---|
Manufacturer | Texas Instruments | Product Category | Digital Isolators |
RoHS | Details | Series | ISO35T |
Mounting Style | SMD/SMT | Package / Case | SOIC-16 |
Number of Channels | 1 Channel | Polarity | Unidirectional |
Data Rate | 1 Mb/s | Isolation Voltage | 2500 Vrms |
Isolation Type | Capacitive Coupling | Supply Voltage - Max | 3.6 V |
Supply Voltage - Min | 3.15 V | Operating Supply Current | 8 mA |
Propagation Delay Time | 340 ns | Minimum Operating Temperature | - 40 C |
Maximum Operating Temperature | + 85 C | Brand | Texas Instruments |
Development Kit | ISO35TEVM | Duplex | Full Duplex |
Moisture Sensitive | Yes | Operating Supply Voltage | 3 V to 3.6 V |
Product Type | Digital Isolators | Factory Pack Quantity | 2000 |
Subcategory | Interface ICs | Unit Weight | 0.019312 oz |
Rating | Catalog | Isolation rating | Basic |
Data rate (max) (MBps) | 1 | Working isolation voltage (VIOWM) (Vrms) | 400 |
Surge isolation voltage (VIOSM) (VPK) | 4000 | Transient isolation voltage (VIOTM) (VPK) | 4242 |
Withstand isolation voltage (VISO) (Vrms) | 2500 | CMTI (min) (kV/µs) | 25 |
Operating temperature range (°C) | -40 to 85 |
Shipping
Shipping Type | Ship Fee | Lead Time | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 days | |
Fedex | $20.00-$40.00 (0.50 KG) | 2-5 days | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 days | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 days | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 days | |
REGISTERED AIR MAIL | $20.00-$40.00 (0.50 KG) | 2-5 days |
Processing Time:Shipping fee depend on different zone and country.
Payment
Terms of payment | Hand Fee | |
---|---|---|
Wire Transfer | charge US$30.00 banking fee. | |
Paypal | charge 4.0% service fee. | |
Credit Card | charge 3.5% service fee. | |
Western Union | charge US.00 banking fee. | |
Money Gram | charge US$0.00 banking fee. |
Guarantees
1.The electronic components you purchase include 365 Days Warranty, We guarantee product quality.
2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.
Packing
-
Step1 :Product
-
Step2 :Vacuum packaging
-
Step3 :Anti-static bag
-
Step4 :Individual packaging
-
Step5 :Packaging boxes
-
Step6 :bar-code shipping tag
All the products will packing in anti-staticbag. Ship with ESD antistatic protection.
Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.
We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.
After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.
We provide high quality products, thoughtful service and after sale guarantee
-
We have rich products, can meet your various needs.
-
Minimum order quantity starts from 1pcs.
-
Lowest international shipping fee starts from $0.00
-
365 days quality guarantee for all products