Images are for reference only See Product Specifications
VNH7070BASTR
Motor Driver Power MOSFET PWM 16-SO
Brands: STMicroelectronics
Mfr.Part #: VNH7070BASTR
Datasheet: VNH7070BASTR Datasheet (PDF)
Package/Case: SOIC-16
Product Type: Motor / Motion / Ignition Controllers & Drivers
RoHS Status:
Stock Condition: 9458 pcs, New Original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
Add To BomVNH7070BASTR General Description
The device is a full bridge motor driver intended for a wide range of automotive applications. The device incorporates a dual monolithic high-side driver and two low-side switches.Both switches are designed using STMicroelectronics’ well known and proven proprietary VIPower®M0-7 technology that allows to efficiently integrate on the same die a true Power MOSFET with an intelligent signal/protection circuitry. The three dies are assembled in SO-16N package on electrically isolated lead-frames.Moreover, its fully symmetrical mechanical design allows superior manufacturability at board level. The input signals INAand INBcan directly interface the microcontroller to select the motor direction and the brake condition. A SEL0 pin is available to address the information available on the CS to the microcontroller. The CS pin allows to monitor the motor current by delivering a current proportional to the motor current value. The PWM, up to 20 kHz, allows to control the speed of the motor in all possible conditions. In all cases, a low level state on the PWM pin turns off both the LSAand LSBswitches.VIPower™ M0-7 family H-bridges for DC Moto.VNH7070BAS Evaluation board.
Features
- AEC-Q100 qualified
- Output current: 15 A
- 3 V CMOS-compatible inputs
- Undervoltage shutdown
- Overvoltage clamp
- Thermal shutdown
- Cross-conduction protection
- Current and power limitation
- Very low standby power consumption
- Protection against loss of ground and loss of VCC
- PWM operation up to 20 kHz
- CS diagnostic functions
- Analog motor current feedback
- Output short to ground detection
- Thermal shutdown indication
- OFF-state open-load detection
- Output short to VCCdetection
- Output protected against short to ground and short to VCC
- Standby Mode
- Half Bridge Operation
- Package: ECOPACK®
Specifications
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Manufacturer: | STMicroelectronics | Product Category: | Motor / Motion / Ignition Controllers & Drivers |
| RoHS: | Details | Product: | Fan / Motor Controllers / Drivers |
| Type: | Half Bridge | Operating Supply Voltage: | 4 V to 28 V |
| Output Current: | 15 A | Operating Supply Current: | 3.5 mA |
| Minimum Operating Temperature: | - 40 C | Maximum Operating Temperature: | + 150 C |
| Mounting Style: | SMD/SMT | Package / Case: | SOIC-16 |
| Qualification: | AEC-Q100 | Packaging: | MouseReel |
| Brand: | STMicroelectronics | Moisture Sensitive: | Yes |
| Number of Outputs: | 2 Output | Operating Frequency: | 20 kHz |
| Product Type: | Motor / Motion / Ignition Controllers & Drivers | Series: | VNH7070BAS |
| Factory Pack Quantity: | 2500 | Subcategory: | PMIC - Power Management ICs |
| Unit Weight: | 0.005291 oz |
Shipping
| Shipping Type | Ship Fee | Lead Time | |
|---|---|---|---|
 |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 days |
 |
Fedex | $20.00-$40.00 (0.50 KG) | 2-5 days |
 |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 days |
 |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 days |
 |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 days |
 |
REGISTERED AIR MAIL | $20.00-$40.00 (0.50 KG) | 2-5 days |
Processing Time：Shipping fee depend on different zone and country.
Payment
| Terms of payment | Hand Fee | |
|---|---|---|
 |
Wire Transfer | charge US$30.00 banking fee. |
 |
Paypal | charge 4.0% service fee. |
 |
Credit Card | charge 3.5% service fee. |
 |
Western Union | charge US.00 banking fee. |
 |
Money Gram | charge US$0.00 banking fee. |
Guarantees
1.The electronic components you purchase include 365 Days Warranty, We guarantee product quality.
2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.
Packing
-
![Product]( "Product")
Step1 :Product
-
![Vacuum packaging]( "Vacuum packaging")
Step2 :Vacuum packaging
-
![Anti-static bag]( "Anti-static bag")
Step3 :Anti-static bag
-
![Individual packaging]( "Individual packaging")
Step4 :Individual packaging
-
![Packaging boxes]( "Packaging boxes")
Step5 :Packaging boxes
-
![bar-code shipping tag]( "bar-code shipping tag")
Step6 :bar-code shipping tag
All the products will packing in anti-staticbag. Ship with ESD antistatic protection.
Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.
We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.
After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.
We provide high quality products, thoughtful service and after sale guarantee
-
![Product]( "Product")
We have rich products, can meet your various needs.
-
![quantity]( "quantity")
Minimum order quantity starts from 1pcs.
-
![shipping]( "shipping")
Lowest international shipping fee starts from $0.00
-
![guarantee]( "guarantee")
365 days quality guarantee for all products
