Images are for reference only See Product Specifications
VNH5050ATR-E
Motor Driver Power MOSFET Parallel, PWM PowerSSO-36 TP
Brands: STMicroelectronics
Mfr.Part #: VNH5050ATR-E
Datasheet: VNH5050ATR-E Datasheet (PDF)
Package/Case: 36-PowerBFSOP(0.295",7.50mmWidth)
RoHS Status:
Stock Condition: 5880 pcs, New Original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
Add To BomVNH5050ATR-E General Description
The VNH5050A-E is a full bridge motor driver intended for a wide range of automotive applications. The device incorporates a dual monolithic high-side driver and two low-side switches. All switches are designed using STMicroelectronics®well known and proven proprietary VIPower®M0 technology that allows to efficiently integrate on the same die a true Power MOSFET with an intelligent signal/protection circuitry. The three dies are assembled in a PowerSSO-36 TP package on electrically isolated lead frames. This package, specifically designed for the harsh automotive environment offers improved thermal performance thanks to exposed die pads. Moreover, its fully symmetrical mechanical design allows superior manufacturability at board level. The input signals INAand INBcan directly interface to the microcontroller to select the motor direction and the brake condition. The DIAGA/ENAor DIAGB/ENB, when connected to an external pull-up resistor, enables one leg of the bridge. Each DIAGA/ENAprovides a digital diagnostic feedback signal as well. The normal operating condition is explained in the truth table. The CS pin allows monitoring the motor current by delivering a current proportional to its value when CS_DIS pin is driven low or left open. When CS_DIS is driven high, CS pin is in high impedance condition. The PWM, up to 20 KHz, allows to control the speed of the motor in all possible conditions. In all cases, a low level state on the PWM pin turns off both the LSAand LSBswitches.VNH5050A Evaluation Board.VNH5050A Evaluation Board.
Features
- Output current: 30 A
- 3 V CMOS compatible inputs
- Undervoltage and overvoltage shutdown
- Overvoltage clamp
- Thermal shutdown
- Cross-conduction protection
- Current and power limitation
- Very low standby power consumption
- PWM operation up to 20 KHz
- Protection against loss of ground and loss of VCC
- Current sense output proportional to motor current
- Output protected against short to ground and short to VCC
- Package: ECOPACK®
Specifications
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Series | ECOPACK®, VIPower™ | Product Status | Active |
| Motor Type - AC, DC | Brushed DC | Function | Driver - Fully Integrated, Control and Power Stage |
| Output Configuration | Half Bridge (2) | Interface | Parallel, PWM |
| Technology | Power MOSFET | Current - Output | 30A |
| Voltage - Supply | 5.5V ~ 18V | Voltage - Load | 5.5V ~ 18V |
| Operating Temperature | -40°C ~ 150°C (TJ) | Grade | Automotive |
| Mounting Type | Surface Mount | Package / Case | 36-PowerBFSOP (0.295", 7.50mm Width) |
| Supplier Device Package | PowerSSO-36 TP |
Shipping
| Shipping Type | Ship Fee | Lead Time | |
|---|---|---|---|
 |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 days |
 |
Fedex | $20.00-$40.00 (0.50 KG) | 2-5 days |
 |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 days |
 |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 days |
 |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 days |
 |
REGISTERED AIR MAIL | $20.00-$40.00 (0.50 KG) | 2-5 days |
Processing Time：Shipping fee depend on different zone and country.
Payment
| Terms of payment | Hand Fee | |
|---|---|---|
 |
Wire Transfer | charge US$30.00 banking fee. |
 |
Paypal | charge 4.0% service fee. |
 |
Credit Card | charge 3.5% service fee. |
 |
Western Union | charge US.00 banking fee. |
 |
Money Gram | charge US$0.00 banking fee. |
Guarantees
1.The electronic components you purchase include 365 Days Warranty, We guarantee product quality.
2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.
Packing
-
![Product]( "Product")
Step1 :Product
-
![Vacuum packaging]( "Vacuum packaging")
Step2 :Vacuum packaging
-
![Anti-static bag]( "Anti-static bag")
Step3 :Anti-static bag
-
![Individual packaging]( "Individual packaging")
Step4 :Individual packaging
-
![Packaging boxes]( "Packaging boxes")
Step5 :Packaging boxes
-
![bar-code shipping tag]( "bar-code shipping tag")
Step6 :bar-code shipping tag
All the products will packing in anti-staticbag. Ship with ESD antistatic protection.
Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.
We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.
After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.
We provide high quality products, thoughtful service and after sale guarantee
-
![Product]( "Product")
We have rich products, can meet your various needs.
-
![quantity]( "quantity")
Minimum order quantity starts from 1pcs.
-
![shipping]( "shipping")
Lowest international shipping fee starts from $0.00
-
![guarantee]( "guarantee")
365 days quality guarantee for all products
