This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

TI TPS61072DDCR

Boost Switching Regulator IC Positive Adjustable 1.8V 1 Output 500mA (Switch) SOT-23-6 Thin, TSOT-23-6

ISO14001 ISO9001 DUNS

Brands: TI

Mfr.Part #: TPS61072DDCR

Datasheet: TPS61072DDCR Datasheet (PDF)

Package/Case: SOT-23

Product Type: Switching Converters, Regulators & Controllers

RoHS Status:

Stock Condition: 6000 pcs, New Original

Warranty: 1 Year Ovaga Warranty - Find Out More

Add To Bom

Quick Quote

Please submit RFQ for TPS61072DDCR or email to us: Email: [email protected], we will contact you within 12 hours.

TPS61072DDCR General Description

The TPS6107x devices provide a power supply solution for products powered by either a one-cell, two-cell, or three-cell alkaline, NiCd or NiMH, or one-cell Li-ion or Li-polymer battery. Output currents can go as high as 75 mA while using a single-cell alkaline, and discharge it down to 0.9 V. It can also be used for generating 5 V at 200 mA from a 3.3-V rail or a Li-ion battery. The boost converter is based on a fixed frequency, pulse-width-modulation (PWM) controller using a synchronous rectifier to obtain maximum efficiency. At low load currents the TPS61070 and TPS61073 enter the power-save mode to maintain a high efficiency over a wide load current range. The power-save mode is disabled in the TPS61071 and TPS61072, forcing the converters to operate at a fixed switching frequency. The maximum peak current in the boost switch is typically limited to a value of 600 mA.

The TPS6107x output voltage is programmed by an external resistor divider. The converter can be disabled to minimize battery drain. During shutdown, the load is completely disconnected from the battery. The device is packaged in a 6-pin thin SOT23 package (DDC).

For all available packages, see the orderable addendum at the end of the datasheet.

TPS61072DDCR

Features

  • 90% Efficient Synchronous Boost Converter
    • 75-mA Output Current at 3.3 V From 0.9-V
      Input
    • 150-mA Output Current at 3.3 V From 1.8-V
      Input
  • Device Quiescent Current: 19 µA (Typ)
  • Input Voltage Range: 0.9 V to 5.5 V
  • Adjustable Output Voltage Up to 5.5 V
  • Power-Save Mode Version Available for
    Improved Efficiency at Low Output Power
  • Load Disconnect During Shutdown
  • Overtemperature Protection
  • Small 6-Pin Thin SOT23 Package
TPS61072DDCR

Specifications

Parameter Value Parameter Value
Topology Boost Vin (min) (V) 0.9
Vin (max) (V) 5.5 Vout (min) (V) 1.8
Vout (max) (V) 5.5 Switch current limit (typ) (A) 0.7
Type Converter Regulated outputs (#) 1
Switching frequency (min) (kHz) 480 Switching frequency (max) (kHz) 720
Iq (typ) (mA) 0.019 Features Synchronous Rectification
Duty cycle (max) (%) 100 Operating temperature range (°C) -40 to 85
Rating Catalog

Shipping

Shipping Type Ship Fee Lead Time
DHL DHL $20.00-$40.00 (0.50 KG) 2-5 days
Fedex Fedex $20.00-$40.00 (0.50 KG) 2-5 days
UPS UPS $20.00-$40.00 (0.50 KG) 2-5 days
TNT TNT $20.00-$40.00 (0.50 KG) 2-5 days
EMS EMS $20.00-$40.00 (0.50 KG) 2-5 days
REGISTERED AIR MAIL REGISTERED AIR MAIL $20.00-$40.00 (0.50 KG) 2-5 days

Processing Time:Shipping fee depend on different zone and country.

Payment

Terms of payment Hand Fee
Wire Transfer Wire Transfer charge US$30.00 banking fee.
Paypal Paypal charge 4.0% service fee.
Credit Card Credit Card charge 3.5% service fee.
Western Union Western Union charge US.00 banking fee.
Money Gram Money Gram charge US$0.00 banking fee.

Guarantees

1.The electronic components you purchase include 365 Days Warranty, We guarantee product quality.

2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.

Packing

  • Product

    Step1 :Product

  • Vacuum packaging

    Step2 :Vacuum packaging

  • Anti-static bag

    Step3 :Anti-static bag

  • Individual packaging

    Step4 :Individual packaging

  • Packaging boxes

    Step5 :Packaging boxes

  • bar-code shipping tag

    Step6 :bar-code shipping tag

All the products will packing in anti-staticbag. Ship with ESD antistatic protection.

Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.

We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.

After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.

  • ESD
  • ESD

Part points

  • The TPS61072DDCR chip is a synchronous boost converter that can efficiently increase the voltage level of a power supply source. It provides a regulated output voltage, adjustable input undervoltage lockout, and flexible switching frequency. The chip is often used in portable devices, such as smartphones and tablets, to provide a higher voltage for various components and maximize battery life.
  • Equivalent

    Some equivalent products of the TPS61072DDCR chip include TPS61076, TPS61077, and TPS61078.
  • Features

    The TPS61072DDCR is a boost converter integrated circuit. It features a wide input voltage range of 1.8V to 6V, a fixed output voltage of 5V, and a switching frequency up to 1.5MHz. It also offers a high efficiency of up to 90% and includes a built-in synchronous rectifier for improved performance.
  • Pinout

    The TPS61072DDCR is a 6-pin step-up converter from Texas Instruments. It has the following pin count and functions: 1. VIN: Input voltage. 2. GND: Ground reference. 3. EN: Enable pin to turn on/off the converter. 4. FB: Feedback pin for output voltage regulation. 5. SW: Switching node connection. 6. VOUT: Boosted output voltage.
  • Manufacturer

    TPS61072DDCR is manufactured by Texas Instruments, an American technology company that designs and manufactures semiconductors and various integrated circuits for a wide range of applications.
  • Application Field

    The TPS61072DDCR is a boost converter designed for battery-powered portable applications. It is commonly used in areas such as smartphones, tablets, portable media players, and other portable electronic devices. The device provides efficient power management and voltage boost capabilities to extend battery life and ensure proper operation of these applications.
  • Package

    The TPS61072DDCR chip is available in a DDC package type, flip-chip form, and has a size of 0.8 mm × 1.2 mm.

We provide high quality products, thoughtful service and after sale guarantee

  • Product

    We have rich products, can meet your various needs.

  • quantity

    Minimum order quantity starts from 1pcs.

  • shipping

    Lowest international shipping fee starts from $0.00

  • guarantee

    365 days quality guarantee for all products

Ratings and Reviews

Ratings
Please rate the product !
Please enter a comment

Please submit comments after logging into your account.

Submit

Recommend

  • TPS61201DRCR

    TPS61201DRCR

    Texas Instruments

    3A Switches for Efficient Power Conversion

  • BQ24172RGYR

    BQ24172RGYR

    Texas Instruments

    Fast charger for 1-3 cell batteries

  • LM1117MPX-ADJ/NOPB

    LM1117MPX-ADJ/NOPB

    TI

    Linear Voltage Regulator IC Positive Adjustable 1 ...

  • LM5112SD

    LM5112SD

    TI

    Low-Side Gate Driver IC Inverting, Non-Inverting 6...

  • UCC28700DBVR

    UCC28700DBVR

    TI

    Converter Offline Flyback Topology 1kHz ~ 130kHz S...

  • LM78L05ACMX/NOPB

    LM78L05ACMX/NOPB

    Texas Instruments

    With its compact SOIC-8 package and RoHS complianc...