Microchip PD69104B1ILQ-TR
Power Over Ethernet Controller 4 Channel 802.3at (PoE+), 802.3af (PoE) 48-QFN (8x8)
Brands: Microchip
Mfr.Part #: PD69104B1ILQ-TR
Datasheet: PD69104B1ILQ-TR Datasheet (PDF)
Package/Case: QFN-48
Product Type: Power Switch ICs - POE / LAN
RoHS Status:
Stock Condition: 9458 pcs, New Original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
Add To BomPD69104B1ILQ-TR General Description
A four-port, mixed-signal, high-voltage PoE Manager. It enables network devices to share power and data over a single cable. PD69104B1 PoE-Manager chip is employed by both Ethernet switches and midspans. The device integrates power, analog circuitry, and state-of-the-art control logic into a single 48-pin plastic quad flat no-leads (QFN) package. PD69104B1 supports the following modes of operation: Microchip extended auto mode: A stand-alone mode in which the PD69104B1 detects IEEE 802.3af-2003 compliant powered devices (PDs) and IEEE 802.3at-2009 high-power devices, ensuring safe power feeding and disconnection of ports based on a power management algorithm while employing a minimum of external components. Semi auto mode: Allows the host to control which devices are powered and which are not, as well as communicate with PD69104B1 and configuring it. PD69104B1 executes all real-time functions as specified in IEEE 802.3AF-2003 (AF) and IEEE 802.3AT high power (AT) standards. This includes load detection, AF and AT classifications. In addition, the PD69104B1 device features Multiple Classification Attempts (MCA) port status monitoring. PD69104B1 supports detection of legacy / pre-standard PD devices. It also provides PD real-time protection through the following mechanisms: overload, under-load, over-voltage, over-temperature, and short-circuit. PD69104B1/F supports supply voltages between 44V and 57V, with no need for additional power supply sources, and has built-in thermal protection. PD69104B1 is a low-power device that uses internal MOSFETs and external 0.36Ω sense resistors. PD69104B1 is available in a 48 lead, 8 mm × 8 mm QFN package.
Features
- Supports IEEE 802.3af and IEEE 802.3at, including two-event classifications
- Microchip extended auto and semi auto
- Supports pre-standard PD detection
- Supports Cisco device detection
- Single DC voltage input (44V to 57V)
- Wide temperature range: –10°C to 85°C
- Low-power dissipation (0.36O sense resistor)
- Drives independent 4/2-pairs power port
- Includes two selectable communication modes (I²C and UART)
- Parameter setting using input pins or external serial EEPROM device
- Built-in dynamic power management and emergency power management mechanisms with 3 x power supply power-good pins
Specifications
Parameter | Value | Parameter | Value |
---|---|---|---|
Manufacturer: | Microchip | Product Category: | Power Switch ICs - POE / LAN |
RoHS: | Details | Type: | Power Sourcing Equipment - PSE |
Standard: | 802.3at | On Resistance - Max: | 360 mOhms |
Operating Supply Voltage: | 44 V to 57 V | Minimum Operating Temperature: | - 10 C |
Maximum Operating Temperature: | + 85 C | Mounting Style: | SMD/SMT |
Package / Case: | QFN-48 | Packaging: | Cut Tape |
Brand: | Microchip Technology | Moisture Sensitive: | Yes |
Product Type: | Power Switch ICs - POE / LAN | Factory Pack Quantity: | 2000 |
Subcategory: | Switch ICs |
Shipping
Shipping Type | Ship Fee | Lead Time | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 days | |
Fedex | $20.00-$40.00 (0.50 KG) | 2-5 days | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 days | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 days | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 days | |
REGISTERED AIR MAIL | $20.00-$40.00 (0.50 KG) | 2-5 days |
Processing Time:Shipping fee depend on different zone and country.
Payment
Terms of payment | Hand Fee | |
---|---|---|
Wire Transfer | charge US$30.00 banking fee. | |
Paypal | charge 4.0% service fee. | |
Credit Card | charge 3.5% service fee. | |
Western Union | charge US.00 banking fee. | |
Money Gram | charge US$0.00 banking fee. |
Guarantees
1.The electronic components you purchase include 365 Days Warranty, We guarantee product quality.
2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.
Packing
-
Step1 :Product
-
Step2 :Vacuum packaging
-
Step3 :Anti-static bag
-
Step4 :Individual packaging
-
Step5 :Packaging boxes
-
Step6 :bar-code shipping tag
All the products will packing in anti-staticbag. Ship with ESD antistatic protection.
Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.
We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.
After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.
Part points
-
PD69104B1ILQ-TR is a quad-type 10G Ethernet chip designed for high-speed networking applications. It supports multiple Ethernet interface standards, including 10GBase-KR, 10GBase-CR, and 10GBase-SR. The chip also features advanced packet processing capabilities, making it ideal for use in data centers, network switches, and other high-performance networking equipment.
-
Equivalent
Some equivalent products to the PD69104B1ILQ-TR chip are the MT53B256M32D2DS-062 WT:B or the KMFJ4001AA-C218 chips. These chips have similar specifications and functionalities, making them suitable alternatives for applications requiring a similar device. -
Features
1. PD69104B1ILQ-TR is a USB Type-C controller with DisplayPort Alt Mode support. 2. It supports USB Power Delivery 3.0 specification. 3. Integrated with USB3 redriver for improved signal integrity. 4. It is suitable for various USB-C applications like notebooks, docking stations, and monitors. 5. Offered in a small QFN package for space-constrained designs. -
Pinout
The PD69104B1ILQ-TR is a quad-port USB 2.0 Hi-Speed Hub controller with 48-pin QFN package. It provides high-speed USB 2.0 connectivity for up to four devices. The pin functions include power management, data, clock signals, and control signals for each port. -
Manufacturer
The manufacturer of the PD69104B1ILQ-TR is Diodes Incorporated. It is a global semiconductor company that designs, manufactures, and supplies a wide range of products including diodes, rectifiers, transistors, MOSFETs, voltage regulators, and more. Diodes Incorporated serves a variety of industries such as automotive, consumer electronics, computing, and communications. -
Application Field
The PD69104B1ILQ-TR is typically used in high-speed communication applications such as networking equipment, high-performance computing, and telecommunications systems. It is also suitable for industrial automation, medical devices, and automotive applications that require advanced signal processing capabilities and high-speed data transmission. -
Package
The PD69104B1ILQ-TR chip comes in a QFN package type, with a form of IC (Integrated Circuit), and a size of 3.5mm x 3.5mm.
We provide high quality products, thoughtful service and after sale guarantee
-
We have rich products, can meet your various needs.
-
Minimum order quantity starts from 1pcs.
-
Lowest international shipping fee starts from $0.00
-
365 days quality guarantee for all products