MXIC MX29LV160TMC-90
Flash, 1MX16, 90ns, PDSO44, 0.500 INCH, PLASTIC, MO-175, SOP-44
Brands: MXIC
Mfr.Part #: MX29LV160TMC-90
Datasheet: MX29LV160TMC-90 Datasheet (PDF)
Package/Case: SOP44
Product Type: Flash memory
RoHS Status:
Stock Condition: 5061 pcs, New Original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
Add To BomMX29LV160TMC-90 General Description
GENERAL DESCRIPTION The MX29LV160T/B & MX29LV160AT/AB is a 16-mega bit Flash memory organized as 2M bytes of 8 bits or 1M words of 16 bits. MXIC's Flash memories offer the most cost-effective and reliable read/write non-volatile random access memory. The MX29LV160T/B & MX29LV160AT/AB is packaged in 44-pin SOP, 48-pin TSOP and 48-ball CSP. It is designed to be reprogrammed and erased in system or in standard EPROM programmers.FEATURES • Extended single - supply voltage range 2.7V to 3.6V • 2,097,152 x 8/1,048,576 x 16 switchable • Single power supply operation - 3.0V only operation for read, erase and program operation • Fast access time: 70/90ns • Low power consumption - 30mA maximum active current - 0.2uA typical standby current • Command register architecture - Byte/word Programming (9us/11us typical) - Sector Erase (Sector structure 16K-Bytex1, 8K-Bytex2, 32K-Bytex1, and 64K-Byte x31) • Auto Erase (chip & sector) and Auto Program - Automatically erase any combination of sectors with Erase Suspend capability. - Automatically program and verify data at specified address • Erase Suspend/Erase Resume - Suspends sector erase operation to read data from, or program data to, any sector that is not being erased, then resumes the erase. • Status Reply - Data polling & Toggle bit for detection of program and erase operation completion. • Ready/Busy pin (RY/BY) - Provides a hardware method of detecting program or erase operation completion. • Sector protection - Hardware method to disable any combination of sectors from program or erase operations - Temporary sector unprotect allows code changes in previously locked sectors. • CFI (Common Flash Interface) compliant (for MX29LV160AT/AB) - Flash device parameters stored on the device and provide the host system to access • 100,000 minimum erase/program cycles • Latch-up protected to 100mA from -1V to VCC+1V • Boot Sector Architecture - T = Top Boot Sector - B = Bottom Boot Sector • Low VCC write inhibit is equal to or less than 1.4V • Package type: - 44-pin SOP - 48-pin TSOP - 48-ball CSP (8x13mm:for MX29LV160T/B; 6x8mm: for MX29LV160AT/AB) • Compatibility with JEDEC standard - Pinout and software compatible with single-power supply Flash
Features
- 1. It is a 16-megabit (2 megabyte) flash memory with a 90 nanosecond program/erase time.
- 2. The device operates on a single 3.0V to 3.6V power supply.
- 3. It offers fast read access time of 70 nanoseconds.
- 4. MX29LV160TMC-90 has a low power consumption during standby or operation.
- 5. It provides a sector erase architecture, allowing for easy memory organization.
- 6. It supports a variety of control pin functionalities for effective data programming and reading.
Application
- 1. The MX29LV160TMC-90 is commonly used in computer systems, laptops, and servers for storing system firmware or the BIOS (Basic Input/Output System).
- 2. It can also be utilized in various consumer electronics devices like digital cameras, mobile phones, and portable media players.
- 3. Embedded systems often employ this flash memory for program storage or firmware updates.
- 4. It is suitable for any application requiring non-volatile memory that can be electronically erased and reprogrammed.
Specifications
Parameter | Value | Parameter | Value |
---|---|---|---|
Manufacturer | MX |
Shipping
Shipping Type | Ship Fee | Lead Time | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 days | |
Fedex | $20.00-$40.00 (0.50 KG) | 2-5 days | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 days | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 days | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 days | |
REGISTERED AIR MAIL | $20.00-$40.00 (0.50 KG) | 2-5 days |
Processing Time:Shipping fee depend on different zone and country.
Payment
Terms of payment | Hand Fee | |
---|---|---|
Wire Transfer | charge US$30.00 banking fee. | |
Paypal | charge 4.0% service fee. | |
Credit Card | charge 3.5% service fee. | |
Western Union | charge US.00 banking fee. | |
Money Gram | charge US$0.00 banking fee. |
Guarantees
1.The electronic components you purchase include 365 Days Warranty, We guarantee product quality.
2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.
Packing
-
Step1 :Product
-
Step2 :Vacuum packaging
-
Step3 :Anti-static bag
-
Step4 :Individual packaging
-
Step5 :Packaging boxes
-
Step6 :bar-code shipping tag
All the products will packing in anti-staticbag. Ship with ESD antistatic protection.
Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.
We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.
After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.
We provide high quality products, thoughtful service and after sale guarantee
-
We have rich products, can meet your various needs.
-
Minimum order quantity starts from 1pcs.
-
Lowest international shipping fee starts from $0.00
-
365 days quality guarantee for all products