NXP MMC2107CFCAG33
32-bit Microcontrollers - MCU 32 Bit 33MHz
Brands: NXP
Mfr.Part #: MMC2107CFCAG33
Datasheet: MMC2107CFCAG33 Datasheet (PDF)
Package/Case: LQFP-144
Product Type: 32-bit Microcontrollers - MCU
MMC2107CFCAG33 General Description
M210 MCore Microcontroller IC 16/32-Bit 33MHz 128KB (128K x 8) FLASH 144-LQFP (20x20)
Features
- Features of the MMC2107 include:
- MCORE M210 integer processor:
- – 32-bit reduced instruction set computer (RISC) architecture
- – Low power and high performance
- OnCE™ debug support
- On-chip 128-Kbyte FLASH:
- – Motorola’s one transistor, CDR MoneT(1) FLASH bit cell
- – Page mode (2111) read access
- – External VPP required for programming
- – 16-K block size
- On-chip, 8-Kbyte static random-access memory (SRAM):
- – One clock per access (including bytes, half-words, and words)
- – Byte, half-word (16 bits), and word (32 bits) read/write accesses
- – Standby power supply support
- Serial peripheral interface (SPI):
- – Master mode and slave mode
- – Wired-OR mode
- – Slave select output
- – Mode fault error flag with CPU interrupt capability
- – Double-buffered operation
- – Serial clock with programmable polarity and phase
- – Control of SPI operation during wait mode
- – Reduced drive control
- Two serial communications interfaces (SCI):
- – Full-duplex operation
- – Standard mark/space non-return-to-zero (NRZ) format
- – 13-bit baud rate selection
- – Programmable 8-bit or 9-bit data format
- – Separately enabled transmitter and receiver
- – Separate receiver and transmitter CPU interrupt requests
- – Programmable transmitter output polarity
- – Two receiver wakeup methods (idle line and address mark)
- – Interrupt-driven operation with eight flags
- – Receiver framing error detection
- – Hardware parity checking
- – 1/16 bit-time noise detection
- – General-purpose input/output port
- Two timers:
- – Four 16-bit input capture/output compare channels
- – 16-bit architecture
- – 16-bit pulse accumulator
- – Pulse widths variable from microseconds to seconds
- – Prescaler
- – Toggle-on-overflow feature for pulse-width modulator (PWM) generation
- – Timer port pullups enabled on reset
- Queued analog-to-digital converter (QADC):
- – Eight analog input channels
- – 10-bit resolution ±2 counts accuracy
- – Minimum 7 µs conversion time
- – Internal sample and hold
- – Programmable input sample time for various source impedances
- – Two conversion command queues with a total of 64 entries
- – Subqueues possible using pause mechanism
- – Queue complete and pause software interrupts available on both queues
- – Queue pointers indicate current location for each queue
- – Automated queue modes initiated by:
- External edge trigger and gated trigger
- Periodic/interval timer, within queued analog-to-digital converter (QADC) module {queue1 and queue2}
- Software command
- – Single-scan or continuous-scan of queues
- – Output data readable in three formats:
- Right-justified unsigned
- Left-justified signed
- Left-justified unsigned
- – Unused analog channels can be used as digital input/output (I/O)
- – Minimum pin set configuration implemented (Continue)
Specifications
Parameter | Value | Parameter | Value |
---|---|---|---|
Manufacturer | NXP | Product Category | 32-bit Microcontrollers - MCU |
RoHS | Details | Series | MMC2107 |
Mounting Style | SMD/SMT | Package / Case | LQFP-144 |
Core | M-CORE | Program Memory Size | 128 kB |
Data RAM Size | 8 kB | Data Bus Width | 32 bit |
Maximum Clock Frequency | 33 MHz | Number of I/Os | 72 I/O |
Supply Voltage - Min | 2.7 V | Supply Voltage - Max | 3.6 V |
Minimum Operating Temperature | - 40 C | Maximum Operating Temperature | + 85 C |
Packaging | ["Tray"] | Brand | NXP Semiconductors |
Data ROM Size | 128 kB | Data ROM Type | Flash/EEPROM |
Height | 1.4 mm | Interface Type | SCI, SPI |
Length | 20 mm | Moisture Sensitive | Yes |
Number of Timers/Counters | 2 Timer | Processor Series | MMC2107 |
Product Type | 32-bit Microcontrollers - MCU | Program Memory Type | EEPROM, Flash |
Factory Pack Quantity | 300 | Subcategory | Microcontrollers - MCU |
Width | 20 mm |
Shipping
Shipping Type | Ship Fee | Lead Time | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 days | |
Fedex | $20.00-$40.00 (0.50 KG) | 2-5 days | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 days | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 days | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 days | |
REGISTERED AIR MAIL | $20.00-$40.00 (0.50 KG) | 2-5 days |
Processing Time:Shipping fee depend on different zone and country.
Payment
Terms of payment | Hand Fee | |
---|---|---|
Wire Transfer | charge US$30.00 banking fee. | |
Paypal | charge 4.0% service fee. | |
Credit Card | charge 3.5% service fee. | |
Western Union | charge US.00 banking fee. | |
Money Gram | charge US$0.00 banking fee. |
Guarantees
1.The electronic components you purchase include 365 Days Warranty, We guarantee product quality.
2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.
Packing
-
Step1 :Product
-
Step2 :Vacuum packaging
-
Step3 :Anti-static bag
-
Step4 :Individual packaging
-
Step5 :Packaging boxes
-
Step6 :bar-code shipping tag
All the products will packing in anti-staticbag. Ship with ESD antistatic protection.
Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.
We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.
After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.
Part points
-
MMC2107CFCAG33 is a chip used in automotive applications. It is designed to provide accurate sensing and measurement of various parameters such as acceleration, inclination, and vibration. It offers high performance and robustness, making it suitable for demanding automotive environments. The chip incorporates advanced features and interfaces that facilitate easy integration into vehicle systems, enabling better control and safety.
-
Equivalent
There are no direct equivalent products for the MMC2107CFCAG33 chip. However, alternative options for similar functions may include the STM32F103C8T6 or the ATSAM3X8E microcontrollers. It is recommended to consult the datasheets of these options to identify the best fit for specific requirements. -
Features
The MMC2107CFCAG33 is a micro-electromechanical system (MEMS) accelerometer that offers high accuracy, low noise, and a built-in temperature sensor. It has a measurement range of ±2 g and provides digital output through a serial peripheral interface (SPI). The device is designed for applications requiring precise motion sensing and vibration monitoring. -
Pinout
The MMC2107CFCAG33 is a Microchip Technology accelerometer sensor with a pin count of 16. The function of the device is to measure acceleration and provide the corresponding outputs. -
Application Field
The MMC2107CFCAG33 is a 3-axis magnetic field sensor suitable for applications such as industrial control systems, robotics, and navigation systems. It can be used for position sensing, motion detection, and magnetic field measurement in various electronic devices and equipment. -
Package
The MMC2107CFCAG33 chip is packaged in a ceramic flip-chip form with a size of 5 x 5 mm.
We provide high quality products, thoughtful service and after sale guarantee
-
We have rich products, can meet your various needs.
-
Minimum order quantity starts from 1pcs.
-
Lowest international shipping fee starts from $0.00
-
365 days quality guarantee for all products