Infineon IR2106STRPBF

Part points

• The IR2106STRPBF chip is an integrated circuit designed for driving insulated gate bipolar transistors (IGBTs) and high-power MOSFETs in applications such as motor drives and high-power converters. It features gate drive outputs with +/-6V typical gate voltage range, matched propagation delay for both channels, and low side and high side outputs. The chip provides protection features like desaturation detection, overcurrent shutdown, and under-voltage lockout.

• Equivalent

  Equivalent products to the IR2106STRPBF chip include the IR2106STR, IR2106STRP, and IR2106SSTRPBF chips.

• Features

  The IR2106STRPBF is a high speed, high voltage, half-bridge gate driver IC. It features an integrated bootstrap diode, undervoltage lockout protection, a fault protection circuit, and a shutdown input. This IC is capable of driving high and low side N-channel power MOSFETs in motor control, inverter, and DC-DC converter applications.

• Pinout

  The IR2106STRPBF is a 14-pin IC (Integrated Circuit). It is a high voltage, high-speed power MOSFET and IGBT driver, designed specifically for driving MOSFETs and IGBTs in half-bridge circuits. It provides the necessary electrical signals to control the switching of these power devices, making it suitable for applications in power electronics and motor control systems.

• Manufacturer

  The manufacturer of the IR2106STRPBF is Infineon Technologies. Infineon Technologies is a semiconductor manufacturing company that produces a wide range of products, including power management integrated circuits (ICs), microcontrollers, sensors, and automotive electronics.

• Application Field

  The IR2106STRPBF is a high voltage, high-speed power MOSFET and IGBT driver. It is commonly used in various applications such as motor drives, switch mode power supplies, and other high voltage control systems. Its ability to drive multiple MOSFETs or IGBTs simultaneously makes it suitable for a wide range of high power applications.

• Package

  The IR2106STRPBF chip is available in a Surface Mount Package (SMD), specifically in the TO-263-7L package form. The size or dimensions would typically be 10.42mm x 9.1mm x 4.66mm, depending on the manufacturer or specific variant.