TI TLC27M4BIN
Precision Amplifiers LiNCMOS Med Bias
Brands: Texas Instruments
Mfr.Part #: TLC27M4BIN
Datasheet: TLC27M4BIN Datasheet (PDF)
Package/Case: 14-PDIP
Product Type: Precision Amplifiers
TLC27M4BIN General Description
The TLC27M4 and TLC27M9 quad operational amplifiers combine a wide range of input offset voltage grades with low offset voltage drift, high input impedance, low noise, and speeds comparable to that of general-purpose bipolar devices.These devices use Texas Instruments silicon-gate LinCMOSTM
LinCMOS is a trademark of Texas Instruments Incorporated. technology, which provides offset voltage stability far exceeding the stability available with conventional metal-gate processes.
The extremely high input impedance, low bias currents, make these cost-effective devices ideal for applications that have previously been reserved for general-purpose bipolar products, but with only a fraction of the power consumption.
Four offset voltage grades are available (C-suffix and I-suffix types), ranging from the low-cost TLC27M4 (10 mV) to the high-precision TLC27M9 (900 uV). These advantages, in combination with good common-mode rejection and supply voltage rejection, make these devices a good choice for new state-of-the-art designs as well as for upgrading existing designs.
In general, many features associated with bipolar technology are available on LinCMOSTM operational amplifiers, without the power penalties of bipolar technology. General applications such as transducer interfacing, analog calculations, amplifier blocks, active filters, and signal buffering are easily designed with the TLC27M4 and TLC27M9. The devices also exhibit low voltage single-supply operation, and low power consumption, making them ideally suited for remote and inaccessible battery-powered applications. The common-mode input voltage range includes the negative rail.
A wide range of packaging options is available, including small-outline and chip-carrier versions for high-density system applications.
The device inputs and outputs are designed to withstand -100-mA surge currents without sustaining latch-up.
The TLC27M4 and TLC27M9 incorporate internal ESD-protection circuits that prevent functional failures at voltages up to 2000 V as tested under MIL-STD-883C, Method 3015; however, care should be exercised in handling these devices, as exposure to ESD may result in the degradation of the device parametric performance.
The C-suffix devices are characterized for operation from 0°C to 70°C. The I-suffix devices are characterized for operation from -40°C to 85°C. The M-suffix devices are characterized for operation over the full military temperature range of -55°C to 125°C.
AVAILABLE OPTIONS TAVIOmax
AT 25°C
PACKAGE
CHIP
FORM
(Y) SMALL OUTLINE
(D)
CHIP CARRIER
(FK)
CERAMIC DIP
(J)
PLASTIC DIP
(N)
TSSOP
(PW)
0°C to 70°C
900 uV
TLC27M9CD
--
--
TLC27M9CN
--
--
2 mV
TLC27M4BCD
--
--
TLC27M4BCN
--
--
5 mV
TLC27M4ACD
--
--
TLC27M4ACN
--
--
10 mV
TLC27M4CD
--
--
TLC27M4CN
TLC27M4CPW
TLC27M4Y
-40°C to 85°C
900 uV
TLC27M9ID
--
--
TLC27M9IN
--
--
2 mV
TLC27M4BID
--
--
TLC27M4BIN
--
--
5 mV
TLC27M4AID
--
--
TLC27M4AIN
--
--
10 mV
TLC27M4ID
--
--
TLC27M4IN
TLC27M41PW
--
-55°C to 125°C
900 uV
TLC27M9MD
TLC27M9MFK
TLC27M9MJ
TLC27M9MN
--
--
10 mV
TLC27M4MD
TLC27M4MFK
TLC27M4MJ
TLC27M4MN
--
--
The D and PW package is available taped and reeled. Add R suffix to the device type (e.g., TLC279CDR).
Features
- Trimmed Offset Voltage:
TLC27M9.900 uV Max at TA = 25°C,
VDD = 5 V - Input Offset Voltage Drift.Typically
0.1 uV/Month, Including the First 30 Days - Wide Range of Supply Voltages Over Specified Temperature Range:
0°C to 70°C.3 V to 16 V
-40°C to 85°C.4 V to 16 V
-55°C to 125°C.4 V to 16 V - Single-Supply Operation
- Common-Mode Input Voltage Range Extends Below the Negative Rail (C-Suffix, I-Suffix Types)
- Low Noise.Typically 32 nV/ Hz\
at f = 1 kHz - Low Power.Typically 2.1 mW at TA=25°C, VDD = 5 V
- Output Voltage Range Includes Negative Rail
- High Input Impedance.1012 Typ
- ESD-Protection Circuitry
- Small-Outline Package Option Also Available in Tape and Reel
- Designed-In Latch-Up Immunity
Specifications
Parameter | Value | Parameter | Value |
---|---|---|---|
Manufacturer | Texas Instruments | Product Category | Precision Amplifiers |
RoHS | Details | Series | TLC27M4B |
Number of Channels | 4 Channel | GBP - Gain Bandwidth Product | 525 kHz |
SR - Slew Rate | 620 mV/us | CMRR - Common Mode Rejection Ratio | 91 dB |
Output Current per Channel | 30 mA | Ib - Input Bias Current | 0.7 pA |
Vos - Input Offset Voltage | 260 uV | en - Input Voltage Noise Density | 32 nV/sqrt Hz |
Supply Voltage - Max | 16 V | Supply Voltage - Min | 4 V |
Operating Supply Current | 570 uA | Minimum Operating Temperature | - 40 C |
Maximum Operating Temperature | + 85 C | Shutdown | No Shutdown |
Mounting Style | SMD/SMT | Package / Case | PDIP-14 |
Amplifier Type | Precision Amplifier | Brand | Texas Instruments |
Height | 4.57 mm | Input Type | Rail-to-Rail |
Ios - Input Offset Current | 1 nA | Length | 19.3 mm |
Operating Supply Voltage | 4 V to 16 V | Pd - Power Dissipation | 1.575 W |
Product | Precision Amplifiers | Product Type | Precision Amplifiers |
Factory Pack Quantity | 25 | Subcategory | Amplifier ICs |
Supply Type | Single | Technology | LinCMOS |
Tradename | LinCMOS | Vcm - Common Mode Voltage | Negative Rail - 0.2 V to Positive Rail - 1 V |
Width | 6.35 mm | Unit Weight | 0.032734 oz |
Shipping
Shipping Type | Ship Fee | Lead Time | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 days | |
Fedex | $20.00-$40.00 (0.50 KG) | 2-5 days | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 days | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 days | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 days | |
REGISTERED AIR MAIL | $20.00-$40.00 (0.50 KG) | 2-5 days |
Processing Time:Shipping fee depend on different zone and country.
Payment
Terms of payment | Hand Fee | |
---|---|---|
Wire Transfer | charge US$30.00 banking fee. | |
Paypal | charge 4.0% service fee. | |
Credit Card | charge 3.5% service fee. | |
Western Union | charge US$0.00 banking fee. | |
Money Gram | charge US$0.00 banking fee. |
Guarantees
1.The electronic components you purchase include 365 Days Warranty, We guarantee product quality.
2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.
Packing
-
Step1 :Product
-
Step2 :Vacuum packaging
-
Step3 :Anti-static bag
-
Step4 :Individual packaging
-
Step5 :Packaging boxes
-
Step6 :bar-code shipping tag
All the products will packing in anti-staticbag. Ship with ESD antistatic protection.
Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.
We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.
After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.
We provide high quality products, thoughtful service and after sale guarantee
-
We have rich products, can meet your various needs.
-
Minimum order quantity starts from 1pcs.
-
Lowest international shipping fee starts from $0.00
-
365 days quality guarantee for all products